Abstract:Nd2NiO4+δ (NNO)-Ce0.sGd0.2O2-δ (CGO)composites were further investigated as cathodes for intermediate temperature solid oxide fuel cells (IT-SOFCs).The effects of sintering temperature and the relative proportions of NNO and CGO on the cell performances were systematically investigated.Planar NiO-YSZ anode-supported cells in commercial size of 50 mm×50 mm were fabricated by tape casting,screen printing and co-sintering methods.A single cell consisted of a NiO-YSZ anode support,a NiO-YSZ anode interlayer,a YSZ electrolyte layer,a CGO interlayer,a NNO-CGO composite cathode layer,and a La0.6Sr0.4CoO3-δ (LSC) current collector from anode to cathode.The results show that the cell with 70NNO-30CGO composite cathode sintered at 1000C exhibits the highest power density of 385 mW/cm2 at 0.7 V at 800C.The ohmic resistance,polarization resistance and area specific resistance are 0.31,0.266 and 0.576 Ω·cm2,respectively.The analysis of electrochemical impedance spectra indicates that the polarization resistance mainly comes from charge transfer resistance.SEM image of the cross-section of the cell after testing reveals that each layer has a good adhesion.Meanwhile,compared with previous research,it can be concluded that adding a CGO interlayer in the single cells leads to an increase in the ohmic resistances and a decrease in the power densities,whereas the values of the polarization resistances decrease.

Low Temperature Synthesis of Nio/Ce0.7la0.3o1.85 Composite Anode Material for Sofc

Study on the properties of NiO/Ce0.7La0.3O1.85 composite anode material for IT-SOFC

Preparation and characterization of La1−xSrxNiyFe1−yO3−δ cathodes for low-temperature solid oxide fuel cells

The Impact of NiO on Microstructure and Electrical Property of Solid Oxide Fuel Cell Anode

Direct Preparation Of Ce0.8sm0.2o1.9 Powders Oxidized With H2o2 For Low Temperature Sofcs Application

Preparation of Ni/YSZ for SOFC Anodes by combustion synthesis

Preparation and Characteristics of Pr<sub>1.2</sub>Sr<sub>0.8</sub>NiO<sub>4</sub>-Sm<sub>0.2</sub>Ce<sub>0.8</sub>O<sub>1.9</sub> Composite Powders for Solid Oxide Fuel Cell Cathode Applications

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Preparation of Porous NiO-Ce0.8Sm0.2O1.9 Ceramics for Anode-supported Low-temperatureSolid Oxide Fuel Cells

Fabrication and Electrochemical Characterizations of Nd2NiO4+δ-Ce0.8Gd0.2O2−δ Composite Cathodes for Anode-Supported Intermediate Temperature Solid Oxide Fuel Cells

Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs

Novel Co-precipitation method to synthesize NiO-YSZ nanocomposite powder for solid oxide fuel cell

Investigation of NiO-La0.30Ce0.70O2-δ novel anode of IT-SOFC with LaGaO3-based electrolyte

La<SUB>0.3</SUB>Sr<SUB>0.2</SUB>Mn<SUB>0.1</SUB>Zn<SUB>0.4</SUB> Oxide-Sm<SUB>0.2</SUB>Ce<SUB>0.8</SUB>O<SUB>1.9</SUB> (LSMZ-SDC) Nanocomposite Cathode for Low Temperature SOFCs

Performance of Nd2NiO4+δ-Ce0.8Gd0.2O2-δ Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Colloidal spray pyrolysis preparation and characterization of nanocrystalline NiO-SDC composite powders for SOFCs

Sm 0 . 5 Sr 0 . 5 CoO 3 Cathodes for Low-Temperature SOFCs

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Studies on Composite Cathode with Nanostructured Ce0.9Sm0.1O1.95 for Intermediate Temperature Solid Oxide Fuel Cells

Ni/SDC Materials for Solid Oxide Fuel Cell Anode Applications by the Glycine-Nitrate Method

Achieve a high electrochemical oxidation activity by a self-assembled cermet composite anode with low Ni content for solid oxide fuel cells