Abstract:Low-temperature solid oxide fuel cells (SOFCs) operated at a temperature of 500 °C and below are developed by modifying the microstructures of single cells consisting of Ni-cermet anodes, doped ceria electrolytes and strontium-doped samaria cobaltite cathodes. The cell microstructure is optimized by varying the starting powder firing temperature, so that the doped ceria electrolytes have a high sinterability, reducing the spin-coating cycles to decrease the electrolyte thickness to approximately 9 μm, adopting a two-step sintering process so that the electrolytes consist of small grains and have a high density; while the anodes are composed of small particles and have high porosity. In particular, the two-step sintering process depresses the co-firing temperature, thus enhancing the electrolyte conductivity and reducing the electrode polarization resistance. Outstanding performance with peak power density of 476, 319, and 189 mW cm−2 at 500, 450, and 400 °C is achieved with a typical single cell comprising a 9-μm-thick Sm0.2Ce0.8O1.9 (SDC) electrolyte, a Ni-SDC porous anode, and a Sm0.5Sr0.5CoO3−δ-Sm0.2Ce0.8O1.9 (SSC-SDC) composite cathode. A durability test over 110 h maintained a power density of approximately 150 mW cm−2 at 400 °C, suggesting optimization of the microstructure has promise for enhancing the performance of low-temperature SOFCs.

Sm 0 . 5 Sr 0 . 5 CoO 3 Cathodes for Low-Temperature SOFCs

Low-temperature Solid Oxide Fuel Cells with Novel La0.6Sr0.4Co0.8Cu0.2O3−δ Perovskite Cathode and Functional Graded Anode

Co‐synthesis of Sm0.5Sr0.5CoO3‐Sm0.2Ce0.8O1.9 Composite Cathode with Enhanced Electrochemical Property for Intermediate Temperature SOFCs

Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs

Properties and Performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ + Sm0.2Ce0.8O1.9 Composite Cathode

Low-temperature co-sintering of co-ionic conducting solid oxide fuel cells based on Ce 0.8 Sm 0.2 O 1.9 -BaCe 0.8 Sm 0.2 O 2.9 composite electrolyte

Electrochemical Performance of SrSc[sub 0.2]co[sub 0.8]o[sub 3−δ] Cathode on Sm[sub 0.2]ce[sub 0.8]o[sub 1.9] Electrolyte for Low Temperature SOFCs

Performance of Composite Cathode Sr0.95Ti0.05Co0.95O3-δ-Sm0.2Ce0.8O1.9 Used in Intermediate Temperature SOFCs

High-performance and CO2‐resistant cathode toward electrocatalytic oxygen reduction for solid oxide fuel cells: Doped ceria and SrCo0.7Nb0.1Ni0.2O3-δ composite

SrCo0.9Sb0.1O3–δ Cubic Perovskite As a Novel Cathode for Intermediate-to-low Temperature SOFCs

Spin-coating derived solid oxide fuel cells operated at temperatures of 500 °c and below

Nano-structured Sm0.5Sr0.5CoO3−δ electrodes for intermediate-temperature SOFCs with zirconia electrolytes

Optimisation Andevaluation of La 0.6 Sr 0.4 CoO 3- D Cathodefor Intermediate Temperature Solid Oxide Fuel Cells

Carbonate-Based Lanthanum Strontium Cobalt Ferrite (LSCF)–Samarium-Doped Ceria (SDC) Composite Cathode for Low-Temperature Solid Oxide Fuel Cells

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Electrochemical Characteristics of Ba0.5Sr0.5Co0.8Fe0.2O3−δ–Sm0.2Ce0.8O1.9 Composite Materials for Low-Temperature Solid Oxide Fuel Cell Cathodes

Fabrication of Gd0. 8 Sr0. 2 CoO3-Sm0.2 Ce0. 8 O1.9 Cathodes for Intermediate Temperature Solid Oxide Fuel Cell

Characteristics of Li2CO3 as sintering aid for Ce0.8Sm0.2O2−δ electrolyte in solid oxide fuel cells

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Evaluation of La0.6Sr0.4CoO3-δ-Ce0.85Sm0.075Nd0.075O2-δ composite cathodes for intermediate temperature solid oxide fuel cells

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method