Abstract:In this work, La0.6Sr0.4CoO3-delta/Ce1-delta Gd2O2-delta (LSC/GDC) composite cathodes are investigated for SOFC application at intermediate temperatures, especially below 700 degrees C. The symmetrical cells are prepared by spraying LSC/GDC composite cathodes on a GDC tape, and the lowest polarisation resistance (R-p) of 0.11 Omega cm(2) at 700 degrees C is obtained for the cathode containing 30 wt.-% GDC. For the application on YSZ electrolyte, symmetrical LSC cathodes are fabricated on a YSZ tape coated on a GDC interlayer. The impact of the sintering temperature on the microstructure and electrochemical properties is investigated. The optimum temperature is determined to be 950 degrees C; the corresponding R-p of 0.24 Omega cm(2) at 600 degrees C and 0.06 Omega cm(2) at 700 degrees C are achieved, respectively An YSZ-based anode-supported solid oxide fuel cell is fabricated by employing LSC/GDC composite cathode sintered at 950 degrees C The cell with an active electrode area of 4 x 4 cm(2) exhibits the maximum power density of 0.42 W cm(-2) at 650 degrees C and 0.54 W cm(-2) at 700 degrees C. More than 300 h operating at 650 degrees C is carried out for an estimate of performance and degradation of a single cell Despite a decline at the beginning, the stable performance during the later term suggests a potential application.

Fabrication of Gd0. 8 Sr0. 2 CoO3-Sm0.2 Ce0. 8 O1.9 Cathodes for Intermediate Temperature Solid Oxide Fuel Cell

Performances of Gd0.8Sr0.2CoO3 Powders for IT-SOFC Cathodes Prepared by Glycine-Nitrate Process

Nanosized Ce0.8Sm0.2O1.9 infiltrated GdBaCo2O5+δ cathodes for intermediate-temperature solid oxide fuel cells

Evaluation of (ba0.5sr0.5)0.85gd0.15co0.8fe0.2o3− Cathode for Intermediate Temperature Solid Oxide Fuel Cell

Optimisation Andevaluation of La 0.6 Sr 0.4 CoO 3- D Cathodefor Intermediate Temperature Solid Oxide Fuel Cells

A high performance intermediate-temperature solid oxide fuel cell using impregnated La0.6Sr0.4CoO3−δ cathode

Co‐synthesis of Sm0.5Sr0.5CoO3‐Sm0.2Ce0.8O1.9 Composite Cathode with Enhanced Electrochemical Property for Intermediate Temperature SOFCs

Optimisation and Evaluation of La0.6Sr0.4CoO3 – Δ Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Preparation and Performance Study of One-Dimensional Nanofiber-Based Sm0.5Sr0.5CoO3-δ-Gd0.2Ce0.8O1.9 Composite Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Properties and Performance of Ba0.5Sr0.5Co0.8Fe0.2O3−δ + Sm0.2Ce0.8O1.9 Composite Cathode

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes

Cuco2o4-Gd0.1ce0.9o1.95 As A Potential Cathode Material for Intermediate Temperature Solid Oxide Fuel Cells

Electrochemical Performance of (ba0.5sr0.5)0.9sm0.1co0.8fe0.2o3−δ As an Intermediate Temperature Solid Oxide Fuel Cell Cathode

PREPARATION AND CHARACTERIZATION OF Gd_(1-x)Sr_xCoO_(3-δ) AS INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELL CATHODE MATERIAL

Electrochemical Performance of a Solid Oxide Fuel Cell Based on Ce0.8Sm0.2O2−δ Electrolyte Synthesized by a Polymer Assisted Combustion Method

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs

Sm 0 . 5 Sr 0 . 5 CoO 3 Cathodes for Low-Temperature SOFCs

GdBaCo(2)O(5+delta)-Sm(0.2)Ce(0.8)O(1.9) Composite Cathodes for Intermediate Temperature SOFCs

Performances of YBaCo1.4Cu0.6O5+δ–Ce0.8Sm0.2O1.9 Composite Cathodes for Intermediate-Temperature Solid Oxide Fuel Cells

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray