Abstract:One of the challenges for improving the performance and cost-effectiveness of solid oxide fuel cells (SOFCs) is the development of effective interconnect materials. A widely used interconnect ceramic for SOFCs is doped lanthanum chromite. In this paper, we report a doped lanthanum chromite, La0.7Ca0.3CrO3−δ (LCC)+xwt.% Gd0.2Ce0.8O1.9 (GDC) (x=0–10), with improved electrical conductivity and sintering capability. In this composite material system, LCC+GDC were prepared by an auto-ignition process and the electrical conductivity was characterized in air and in H2. The LCC powders exhibited a better sintering ability and could reach a 94.7% relative density at 1400°C for 4h in air and with the increase of GDC content the relative density increased, reached 98.5% when the GDC content was up to 10wt.%. The electrical conductivity of the samples dramatically increased with GDC addition until a maximum of 134.48Scm−1 in air at 900°C when the materials contained 3wt.% GDC. This is 5.5 times higher than pure LCC (24.63Scm−1). For the sample with a 1wt.% GDC content, the conductivity in pure H2 at 900°C was a maximum 5.45Scm−1, which is also higher than that of pure LCC ceramics (4.72Scm−1). The average thermal expansion coefficient (TEC) increased with the increase of GDC content, ranging from 11.12 to 14.32×10−6K−1, the majority of which unfortunately did not match that of 8YSZ. The oxygen permeation measurement presented a negligible oxygen ionic conduction, indicating that it is still an electronically conducting ceramic. Therefore, it is a very promising interconnect material for higher performance and cost-effectiveness for SOFCs.

PREPARATION AND CHARACTERIZATION OF Gd_(1-x)Sr_xCoO_(3-δ) AS INTERMEDIATE TEMPERATURE SOLID OXIDE FUEL CELL CATHODE MATERIAL

Preparation and characterization of Gd1-xSrxCoO 3-δ and Gd0.8Sr0.2Co1-yFe yO3-δ

Performances of Gd0.8Sr0.2CoO3 Powders for IT-SOFC Cathodes Prepared by Glycine-Nitrate Process

Synergistic electron doping and ion conductive phase incorporating of SrCoO3- as desirable cathode materials for intermediate-temperature solid oxide fuel cells

Cobalt-free Sr0.7Y0.3CuO2+δ As a Cathode for Intermediate-Temperature Solid Oxide Fuel Cell

Synthesis and Characterization of SmSrCo2−xMnxO5+δ (x=0.0, 0.2, 0.4, 0.6, 0.8, 1.0) Cathode Materials for Intermediate-Temperature Solid-Oxide Fuel Cells

CO2-tolerant Sr2CoTaO6-δ double perovskite oxide as a novel cathode for intermediate-temperature solid oxide fuel cell

Densification of Ce0.9Gd0.1O2-δ Interlayer to Improve the Stability of La0.6Sr0.4Co0.2Fe0.8 O3-δ/Ce0.9Gd0.1O2-δ Interface and SOFC

Characterization of SrCo 0.7 Fe 0.2 Nb 0.1 O 3−δ cathode materials for intermediate-temperature solid oxide fuel cells

Cerium and Niobium Doped SrCoO3−δ As a Potential Cathode for Intermediate Temperature Solid Oxide Fuel Cells

Preparation, Structure and Performance of La0.6Sr0.4Co0.2Fe0.8O3 Cathodes of Intermediate Temperature Solid Oxide Fuel Cells

Preparation and properties of BaxSr1-xCoyFe1-yO3-δ cathode material for intermediate temperature solid oxide fuel cells

Evaluation Of Gdbacuco0.5fe0.5o5+Delta As Cathode Material For Intermediate Temperature Solid Oxide Fuel Cells

Novel SrTixCo1−xO3−δ Cathodes for Low-Temperature Solid Oxide Fuel Cells

Preparation and properties of ceramic interconnecting materials, La0.7Ca0.3CrO3-δ doped with GDC for IT-SOFCs

Evaluation and Performance Optimization of Double-Perovskite LaSrCoTiO5+δ Cathode for Intermediate-Temperature Solid-Oxide Fuel Cells

Preparation and Performance of Sr3Fe2-xNixO7-delta (x=0, 0.1, 0.2, 0.3) Cathode for Intermediate-Temperature Solid Oxide Fuel Cells

Preparation and Properties of Gd3+ and Y3+ Co-Doped Ceria-Based Electrolytes for Intermediate Temperature Solid Oxide Fuel Cells

High Active Cathode for Doped Ceria Electrolyte in SOFC

A-site Deficient Ba1−xCo0.7Fe0.2Ni0.1O3−δ Cathode for Intermediate Temperature SOFC

Insight into the structure and functional application of the Sr0.95Ce0.05CoO3-δ cathode for solid oxide fuel cells