Abstract:Laser surface texture (LST) technology can be used to increase the adherence of thermal barrier coating (TBC). The primary research method is to conduct a large number of laser experiments to determine the optimal texture parameters. To minimize costs and enhance efficiency, in the current work, five types of circular pit textures were summarized; the plane strain model was established using the transient thermomechanical coupling finite element method; the residual stress field after spraying was used as the prestress field; the influence of different textures on the distribution of the residual stress field after a thermal cycling was analyzed; and the propagation law of cracks in the coating was predicted. The current work focuses on: (1) The two-dimensional cross-sectional morphology of texture; (2) the principal stress s22 perpendicular to the interface (resulting in mode I interface crack) and the shear stress s12 parallel to the interface (resulting in mode II interface crack); (3) texture variables—diameter, depth, and spacing. The results revealed that after thermal cycling, the texture in the ceramic top coat (TC) bore tensile stress of around 350 MPa. Both sides of the pit in the metallic bond coat (BC) bore tensile stress, while the bottom bore compressive stress. Among them, the positive tensile stress of the texture with a sinusoidal section was the greatest, whereas the shear stress was the least. The maximum stress in texture increased as the diameter and depth increased, while the minimum principal stress was obtained by adjusting the spacing among the adjacent textures. The stress level in the coating was reduced by selecting the appropriate texture morphology, and the crack propagation was more complex, that is, it took a longer time before reaching failure, which is expected to improve the life.

The Influence of Thermal Expansion Coefficient on the Stresses of Thermal Barrier Coatings

Finite Element Analysis of Stress Field of Thermal Barrier Coating during the Deposition Process

Modeling of thermal residual stresses in multilayer coatings with graded properties and compositions

An analytical model for predicting thermal residual stresses in multilayer coating systems

Effect of Geometric Parameter on Thermal Stress Generation in Fabrication Process of Double-Ceramic-layers Thermal Barrier Coating System

Experimental and Simulation Analysis of the Evolution of Residual Stress Due to Expansion Via CMAS Infiltration in Thermal Barrier Coatings

The Influence of Bondcoat and Topcoat Mechanical Properties on Stress Development in Thermal Barrier Coating Systems

Effect of Interlayer on the Residual Stresses Within High-Temperature Coating

Finite Element Simulation of Thermodynamic Properties of NiCoCrAlY/YSZ Gradient Coating

Use of the Finite Element Technique to Analyze Thermal Stress in Coating Under Thermal Loading Conditions

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method

Effect of Interface Curvature on Local Growth Behavior and Stress of Thermal Barrier Coatings

Effect of Oxide Growth on the Stress Development in Double-Ceramic-layer Thermal Barrier Coatings

Strain-induced Multiscale Structural Changes in Lamellar Thermal Barrier Coatings

Effects of oxide thickness, Al2O3 interlayer and interface asperity on residual stresses in thermal barrier coatings

Design and Optimization of Interface Morphology of Thermal Barrier Coatings Based on Regulation of Residual Stress: A Finite Element Simulation Study

Analysis on Thermal Stress of Optimized Functionally Graded Coatings During Thermal Shock Based on Finite Element Simulation

OS0805 Effect of Residual Stress on Nonlinear Response of Plasma-Sprayed Thermal Barrier Coatings

Effect of interface on the thermal conductivity of thermal barrier coatings: A numerical simulation study

A Numerical Study of the Influence of Interface Morphology on the Stress Behavior in Thermal Barrier Coatings Near an Inclined Film-Cooling Hole

Mechanical Model for the Interfacial Thermal Stress in Porous Ceramic Foam Coatings Bonded to a Substrate