Abstract:The manufacture of damping alloy parts with stable damping properties and high mechanical performances in the selective laser melting (SLM) process is influenced by temperature evolution and residual stress distribution. Choosing an appropriate scanning strategy, namely the specific trajectory along which the laser head scans powders within given area, is crucial, but clearly defined criteria for scanning strategy design are lacking. In this study, a three-dimensional finite element model (FEM) of the SLM process for manufacturing a WE43 alloy component was established and validated against the published experimental data. Eleven different scanning strategies were designed and simulated, considering variables such as scanning track length, direction, Out–In or In–Out strategy, start point, and interlayer variation. The results showed that scanning strategy, geometry, and layer number collectively affect temperature, melt pool, and stress outputs. For instance, starting scanning at a colder part of the powder layer could lead to a high peak temperature and low melt pool depth. A higher layer number generally results in lower cooling rate, a lower temperature gradient, a longer melt pool life, and larger melt pool dimensions. Changing the start point between scanning circulations helps mitigate detrimental residual stress. This work highlights the potential of analyzing various scanning strategy-related variables, which contributes to reducing trial-and-error tests and selecting optimal scanning strategies under different product quality requirements. This article can assist in the design of appropriate scanning strategies to prevent defects such as element loss due to evaporation, poor bonding, and deformation or cracking from high residual stress. Additionally, identifying stress concentration locations and understanding the effects of geometry and layer number on thermal and mechanical behaviors can assist in geometry design.

Edge Effects of Metal Plate in Laser Forming

Edge effect reduction in laser bending of DP980 high-strength steel

Numerical And Experimental Investigation Of Deformation Field During Laser Forming Of Metal Sheet

Effects of Laser Scanning Strategy on Bending Behavior and Microstructure of DP980 Steel

Investigation on the bending deformation of laser peen forming with a simplified eigenstrain-based finite element model

Research on Bending Angels of Laser Peen Forming Without Confine Layer

Three-Dimensional Numerical Study on Temperature Field of Laser Bending of Sheet Metal

Research on the Mechanism and Processability of Roll Forming

The Effect of Elastic Pre-Bending on the Laser Peen Forming of 2024-T351 Aluminum Alloy Plate

The Causes and Control of Longitudinal Edge Cracks of the Plate

Real-time monitoring of temperature gradients and bending mechanism in multi-scan laser forming process

Design of an innovative laser-assisted four-point bending forming process for high-stiffened structure of aluminum alloy

The effect of rescanning strategy on residual stress and deformation of laser-based powder bed fusion of 316L stainless steel thin-walled parts

The Effect of Scanning Strategy on the Thermal Behavior and Residual Stress Distribution of Damping Alloys during Selective Laser Melting

Parameter Optimization for Laser Peen Forming on 6005A-T6 Aluminum Alloy Plates to Enhance the Constrained Deformation of Integral Stiffened Plates

Influence of bending angle function on local thinning defects of roll-formed sheets based on segmental boundary combination optimization

Experimental and numerical investigation on laser beam forming of steel sheets

Investigation of Scanning Strategies and Laser Remelting Effects on Top Surface Deformation of Additively Manufactured IN 625

Characterization of the deformation behavior and microstructure evolution in laser bending of TC4 titanium alloy heavy plate

Deformation Behaviours of Laser Curve Bending of Sheet Metals

Numerical Simulation of Stainless Steel-Carbon Steel Laminated Plate Considering Interface in Pulsed Laser Bending