Li_(1.05)Nb_(0.55)Ti_(0.55)O_3 MICROWAVE DIELECTRIC CERAMICS PREPARED BY LOW- TEMPERATURE SINTERING AND THEIR MICROWAVE DEVICE

LU Delong
DOI: https://doi.org/10.3321/j.issn:0454-5648.2005.07.001
2005-01-01
Abstract:Effects of V_(2)O_(5) state on the sintering behavior, slurry properties and microwave dielectric properties of Li_(1.05)Nb_(0.55)·Ti_(0.55)O_(3 )ceramic were investigated. Chip multilayer highpass filter was prepared by low-temperature co-fired ceramic technology (LTCC). Results indicate that for the calcined powder with 2%V_(2)O_(5) in mass, the current effect of V_(2)O_(5) in Li_(1.05)Nb_(0.55)Ti_(0.55)O_(3) ceramic is changed by heat treatment. The LiVO_(3) phase is formed, preventing the viscosity from increasing abnormally and the agglomeration of powder due to the reaction between V_2O_5 and TiO_2. The slurry characteristic is improved. The sintering and dielectric properties are more excellent than those obtained by other ways of doping with V_(2)O_(5). Li_(1.05)Nb_(0.55)Ti_(0.55)O_(3) ceramic prepared by low-temperature sintering is well matched with Ag electrodes. Chip multilayer highpass filters with a size of (4.5 mm×)3.2 mm×2.0 mm, and a bandpass of 1.65—2.15 GHz, maximum insertion loss of 1.567 dB, band stop of 42.7 dB(at (1.45 GHz)) and voltage stand wave ratio 2.0 were obtained, which is suitable for surface mount technology. It can also be used in mobile communications, wireless local area networks and global positioning systems.
What problem does this paper attempt to address?