Abstract:Precalcification of Polyactive 1000/70/30 with a biomimetic calcium phosphate coating is expected to enhance the bioactivity of this biodegradable polymer for the application as bone filler or scaffold of bone tissue engineering. This study presents a 1-day one-step incubation method to obtain either amorphous or bone-like apatitic calcium phosphate coating on Polyactive 1000/70/30. Either dense plates or three-dimensional porous blocks of the polymer were incubated in a simplified but concentrated simulated body fluid-derived solution at 37 degrees C. By bubbling CO2 gas, a solution was prepared with calcium and phosphate ion concentrations five times of that of regular simulated body fluid. With controlled stirring, the CO2 was released out of the solution and exchanged by air. The pH of the solution increased to induce coating formation. Adjusting stirring rate and CO2/air exchange rate controlled the process kinetics. The reaction kinetics had little influence on the crystallographic structure of the final coating mineral for a given solution composition as shown by Fourier transform infrared spectroscopy and X-ray diffraction. However, the interface structure between the coating and substrate was kinetics-dependent. A fast precipitation condition resulted in a uniform but superficial calcification pattern at the surface of polymer. A slow process by selecting either a slow stirring or a slow CO2/air exchange, on the contrary, induced a localized but deep inside calcification pattern. A tensile test showed no statistically significant difference in the mechanical properties among uncoated and coated polymers. The cracking behavior of coatings from different kinetics, however, exhibited different manners, as can be attributed to different interface structures and interfacial strengths.

Biomimetic Coating of Calcium Phosphate on Biometallic Materials

[Experimental Study of Fast Formation of Biomimetic Apatite Coatings on Pure Titanium Surface].

Apatite Layer-Coated Titanium for Use As Bone Bonding Implants

A simple biomimetic method for calcium phosphate coating

Bioactive Calcium Phosphate Coatings for Bone Implant Applications: A Review

[Fast Formation of Biomimetic Apatite Coatings on Pure Porous Titanium Implant's Surface].

Longer-Term Mechanical And Biological Evaluation Of Titanium Alloy Coated With Apatite Layer

Biomimetic Calcium Phosphate Coatings on Polyactive 1000/70/30.

Amorphous Precursor‐Mediated Calcium Phosphate Coatings with Tunable Microstructures for Customized Bone Implants

[Progress in the Study of Biomimetic Process for Depositing Apatite Coatings].

Calcium Phosphate Coating on AT Titanium Plate by CD and BD Methods

In Vivo Comparison of Bone Formation on Titanium Implant Surfaces Coated with Biomimetically Deposited Calcium Phosphate or Electrochemically Deposited Hydroxyapatite

Universal and Biocompatible Hydroxyapatite Coating Induced by Phytic Acid-Metal Complex Multilayer

Biomimetic Calcium Phosphate Coatings for Bioactivation of Titanium Implant Surfaces: Methodological Approach and In Vitro Evaluation of Biocompatibility

Biomimetic processing of calcium phosphate coating

Bone Responses to Rough Titanium Implants Coated with Biomimetic Ca-P in Rabbit Tibia.

Substituted hydroxyapatite coatings of bone implants.

In Vitro Evaluation of Biologically Derived Hydroxyapatite Coatings Manufactured by High Velocity Suspension Spraying

Hybrid Calcium Phosphate Coatings with the Addition of Trace Elements and Polyaspartic Acid by a Low-Thermal Process.

Bone-like growth of hydroxyapatite in the biomimetic coating of Ti-6Al-4V alloy pretreated with protein at 25 °C

BSA/HA Coating on Titanium Alloy for Direct Bond Formation