Abstract:The heat dissipation of power amplifier (PA) chips is one of the biggest challenges in the development of miniaturized state of art glass-based high-power RF modules. Glass has excellent electrical properties, but the extremely poor thermal conductivity of it also brings many barriers in the application. Its (quartz glass) thermal conductivity is only 1/93 of that of silicon, so there will be a problem of poor heat dissipation. In recent years, there has been an increasing amount of literature on microfluidic cooling technology and this method was demonstrate as an efficient way in cooling application. In this article, we designed, fabricated, and tested a Si-Glass microchannel heat sink, which took advantage of the high thermal conductivity of silicon to deal with the insufficient thermal conductivity of the glass interposer. Finite element simulation was used to study the thermal property of the Si-Glass heat sink and a multi-parameter optimal method was used to design the geometrical parameters, including the number of flow channels and other geometrical parameters of the heat sink. Then the aforementioned microchannel heat sinks were fabricated using cleanroom fabrication on 4-inch silicon and glass wafers. To complete the thermal test, the Thermal Demonstration Vehicles (TDVs) were fabricated by bonding the sample onto a customized PDMS holder for fluid connections with the flow loop. A programmable power source was used to heat the TDV in a stepwise manner, and a syringe pump was used to supply the liquid to cool the heat sink. Results show that the heat sink can dissipate heat flux greater than 150W/cm2with substrate temperature lower than 100°C.

Design and fabrication of heat sink with impedance matching circuit for high-speed EA modulators

High-Speed Coplanar Waveguide Based Submount for 40 Gbit/s Electroabsorption Modulator

HIGH-SPEED Al2O3 -BASED SUBMOUNT FOR 40Gb/s ELECTROABSORPTION MODULATORS

Bing Xiong, Jianbo Tian, Jian Wang, Pengfei Cai, Changzheng Sun

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

A Wideband Electro-Optic Modulator Based on Long Range Surface Plasmon Resonances

A Novel Heatsink with Mushroom-type EBG Structure for EMI Radiation Suppression

Emc Modelling of Dual Die Cpu with A Heatsink

Vertically Polarized, Electromagnetic Interference Suppressed Millimeter-Wave Active Heatsink Antenna Based on Gap Waveguide Technology

Design. Fabrication, and Test of an Embedded Si-Glass Microchannel Heat Sink for High-power RF Application

Novel Planar Electrode Structure for High-Speed (>40 GHz) Electroabsorption Modulators

Heatsink Antenna Array for Millimeter-Wave Applications

Microembossed Copper Microchannel Heat Sink for High‐density Cooling in Electronics

Low-threshold DFB-laser-integrated High-Speed EA Modulators Based on Ridge Waveguide Structure by ICP Etching

Microwave Packaging Of High-Speed Optoelectronic Devices

Electrothermal Design of SIW Slot Antenna Array with Fin-Shaped Heatsink Enclosed

Design of Traveling Wave Electrode for High-speed Silicon Modulators

A Kind of Microchannel Heat Sink Optimization for High Power Chips Based on Cfd and Non-Silicon Mems Technology

Substrate Integrated Waveguides Slot Antenna Array with Heatsink Enclosed

Microwave Packaging for 10-Gb/s EML Modulators

Jet Microchannel with Sawtooth Wall for Efficient Cooling of High-Power Electronics