Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Determining Thin Film Thickness Characterization Using Adaptive Simulated Annealing Algorithm

Thin Film Thickness Determination Using Adaptive Simulated Annealing Algorithm and Conjugate Gradient Algorithm

Thin Film Optical Parameters Determination Using Adaptive Simulated Annealing Algorithm

A New Method for Determination of the Optical Constants and Thickness of Thin Film

Determination of the Optical Constants of Solar-Control Amorphous Silicon Thin Films on Float Glass

Measurement of Absolute Phase Shift on Reflection of Thin Films Using White-Light Spectral Interferometry

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

The Research of a Method to Obtain the Optical Parameters of Semiconductor Films

Interference-Aided Spectrum-Fitting Method for Accurate Film Thickness Determination

A Research of Thickness Measurement of Nano-Porous Alumina Films Based on Reflection Spectrum

Intensity Shift Correction for Thin Film Optical Parameter Determination

Multilayer Thin Film Thickness Measurement Using Sensitivity Separation Method

A Review of Thin-film Thickness Measurements using Optical Methods

Thickness Estimation of the Si Thin Films: a Simulation Study

A Measuring System of Film Thickness Based on Atomic Force Microscope

In-Situ Thickness Measurement of Porous Alumina by Atomic Force Microscopy and the Reflectance Wavelength Measurement from 400-1000 Nm

Thermal characterization of thin films: A chip-based approach for in-plane property analysis

Improved Full-Field Rotating Analyzer Ellipsometry Method for Ultrathin Film Characterization

In situ differential atomic force microscopy (AFM) measurement for ultra-thin Thiol SAM patterns by area-selective deposition technique

Investigation of Molecular Rearrangement by AFM Analysis of SAMs Annealing Process

A method for measuring and correcting errors in the thickness of semiconductor thin films based on reflection spectroscopy fitting technology