Abstract:The ablation threshold, depth and crater shape of fused silica for femtosecond laser processing are investigated theoretically and experimentally. Based on tracking the spatiotemporal distribution of the free electron density, free electron temperature, and laser intensity, the electron dynamics as well as the transient optical and thermophysical properties of femtosecond laser irradiated fused silica are quantitatively determined. The numerical model is validated by comparing the calculated threshold fluence, depth and crater shape of ablation with the experimentally measured ones at a wavelength of 800 nm. The free electron relaxation time at different laser fluences and pulse durations throughout the photoionization process and impact ionization process are probed. In the present work, the findings are as follows. 1) The electron relaxation time significantly affects the material optical properties and femtosecond laser energy absorption. The optical properties change dramatically. The fused silica becomes opaque for the case of laser irradiation with fluence higher than the ablation threshold. Moreover, the transition from electron-phonon collision to electron-ion collision accompanies with the femtosecond laser ablation of fused silica. 2) By using the proposed model, the experimentally observed saturation of ablation depth at high laser fluence is elucidated by the significant change of optical reflectivity and absorption coefficient. Both the results of theoretical simulation and experimental observation indicate that laser fluence has a strong influence on the shape of the ablation crater. The ablation volume increases sharply with the increase of laser fluence for femtosecond laser irradiation, compared with that for picosecond laser irradiation. 3) With the increase of femtosecond laser fluence, the ablation depth removal efficiency and ablation efficiency are both saturated, followed by slight decrements. The peak of ablation depth removal efficiency peak occurs at the femtosecond laser fluence close to 1.4 times of the ablation threshold. While the accuracy is slightly low due to the higher sensitivity of the ablation characteristics (ablation crater depth and ablation volume) to the shorter femtosecond laser pulse. For the femtosecond laser fluence higher than 3.5 times of the ablation threshold, good repeatability over a very wide fluence range can achieve accurate processing results, because a more consistent flat-bottom ablation profile tends to appear. However, the heat-affected zone leads the processing quality to degrade, compared with the scenario of femtosecond laser fluence close to the ablation threshold.

Ablation Mechanism of Fused Silica under Femtosecond Laser Pulse

Mechanisms In Fs-Laser Ablation In Fused Silica

Theoretical and Experimental Research of Femtosecond Laser Processing Fused Silica

Theoretical Analysis of Fs-Laser Induced Micro-Explosion in Fused Silica

Spatiotemporal Probe into the Femtosecond Laser Processing of Fused Silica

Experimental Study on 800 Nm Femtosecond Laser Ablation of Fused Silica in Air and Vacuum

Theoretical Model Investigation about the Mechanism of Ultrashort -Pulse Laser Ablation Fused Silica

The ablation process induced by femtosecond laser in transparent dielectrics

Microscopic Mechanisms of Ablation and Micromachining of Dielectrics by Using Femtosecond Lasers

Energy Transfer Between Femtosecond Laser and Silicon Carbide

Study on Ablation Threshold of Fused Silica by Liquid-Assisted Femtosecond Laser Processing.

Phenomenological Modeling for Femtosecond Laser Processing of Fused Silica

Femtosecond-Laser-Ablation Dynamics in Silicon Revealed by Transient Reflectivity Change

A Novel Laser-Accumulated Plasma Model with an Effective Beam Profile Based on Experiments with Mj-Level Femtosecond Pulses Targeting for Analysis of the Ablation Thresholds and Ablated Channel Widths on Fused Silica Surfaces

Physical Mechanism of Pulsed Laser Interaction with Fused Silica Optics During CO2 Laser Mitigation Process

Ultra-short Laser Ablation of Dielectrics: Theoretical Analysis of Threshold Damage Fluence and Ablation Depth

Controlling of Surface Ablation Threshold of Fused Silica by Double-Pulsed Femtosecond Laser

Surface Evolution in Ultrafast Laser Ablation of Fused Silica

A Two-Step Model for Multiple Picosecond and Femtosecond Pulses Ablation of Fused Silica

The Experimental and Modeling Study of Femtosecond Laser-Ablated Silicon Surface

Femtosecond Laser Processing of Fused Silica and Aluminum Based on Electron Dynamics Control by Shaping Pulse Trains