Abstract:The porous epoxy resin matrix composites filled with iron powder referenced in this work consist of both ferromagnetic base materials and porous materials, which have properties of electromagnetic shielding and impact energy absorbing. Aimed at the dynamic compressive properties of the composites at different high strain rates, two materials were studied: the first is Fe/ER-17 with 40% porosity and 17% mass fraction of iron powder; the other is Fe/ER-90 with 10% porosity and 90% mass fraction of iron powder. The investigation results showed: (1) the quasi-static compressive failure strengths of the two composites are much lower than their dynamic compressive failure strengths; (2) Fe/ER-17 exhibits obvious characteristics of a porous material at high strain rates (≥3000/s), whereas FE/ER-90 exhibits a visco-elastic response at all strain rates; (3) Fe/ER-17 and Fe/ER-90 show a strain rate hardening effect on dynamic yield strengths. The dynamic yield strengths of Fe/ER-17 change from 19.23 MPa at a strain rate of 850/s to 30.97 MPa at a strain rate of 6000/s, and dynamic yield strengths of Fe/ER-90 change from 114.93 MPa at a strain rate of 700/s to 136.95 MPa at a strain rate of 3600/s. The hardening effect of dynamic yield strengths is linear with the strain rate, and their linear strain rate hardening factors are very small (10 × 10−4 and 0.6 × 10−4, respectively). A constitutive model of series form for a porous material and a modified ZWT constitutive model for a visco-elastic material were adopted for Fe/ER-17 and Fe/ER-90, respectively. The constitutive relationships developed captured the dynamic compressive characteristics of the two materials.

Experimental Investigations to Yield Stresses Of Porous Materials Made Of Iron Alloy And Bronze

Study on the Mechanical Behavior of Porous Iron Alloy at High Strain Rates

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

Theoretical Modeling of Temperature, Strain Rate and Porosity Dependent Yield Strength of Porous Metallic Material

Dynamic response for porous epoxy resin matrix composites filled with iron powder at different strain rates and constitutive relationships

A Theoretical Model and Experimental Investigation of a Nonlinear Constitutive Equation for Elastic Porous Metal Rubbers

On the Deformation and Fracture of Porous Materials

Lower-bound and Upper-bound Rigid-plastic Constitutive Models for Porous Materials. Comparison and Examination.

Investigation on Compressive Behavior of Cu-35Ni-15Al Alloy at High Temperatures

A Yield Criterion for Porous Crystalline Materials with Inner Pressure

Rate Dependent Rheological Stress-Strain Behavior of Porous Nanocrystalline Materials

Study on Dynamic Properties of Plain Concrete under Uniaxial Compression and Its Constitutive Relation

Investigation on the Material Constitutive Model in Sheet Metal Forming

Preliminary Examination of the Modified Lower-Bound Meso-Damage Constitutive Model for Porous Materials

Study of fabricating technology of a porous aluminum alloy

Experimental investigation on a dynamic constitutive relationship of 5A06 Al alloy

Complex Stress-Strain Relations of Tubular Materials Studied with A Flexible Hydroforming System

Experimental and Physical-Based Constitutive Model Study of Fcc Metal over Wide Temperature and Strain Rate Ranges

Deformation and Damage Characteristics of Porous Materials under Different Triaxialities

Quantitative Description of Temperature- and Strain Rate-Dependence of Yield Strength of Structural Steels

Numerical investigation of influences of porous density and strain-rate effect on dynamical responses of aluminum foam