Abstract:The porous epoxy resin matrix composites filled with iron powder referenced in this work consist of both ferromagnetic base materials and porous materials, which have properties of electromagnetic shielding and impact energy absorbing. Aimed at the dynamic compressive properties of the composites at different high strain rates, two materials were studied: the first is Fe/ER-17 with 40% porosity and 17% mass fraction of iron powder; the other is Fe/ER-90 with 10% porosity and 90% mass fraction of iron powder. The investigation results showed: (1) the quasi-static compressive failure strengths of the two composites are much lower than their dynamic compressive failure strengths; (2) Fe/ER-17 exhibits obvious characteristics of a porous material at high strain rates (≥3000/s), whereas FE/ER-90 exhibits a visco-elastic response at all strain rates; (3) Fe/ER-17 and Fe/ER-90 show a strain rate hardening effect on dynamic yield strengths. The dynamic yield strengths of Fe/ER-17 change from 19.23 MPa at a strain rate of 850/s to 30.97 MPa at a strain rate of 6000/s, and dynamic yield strengths of Fe/ER-90 change from 114.93 MPa at a strain rate of 700/s to 136.95 MPa at a strain rate of 3600/s. The hardening effect of dynamic yield strengths is linear with the strain rate, and their linear strain rate hardening factors are very small (10 × 10−4 and 0.6 × 10−4, respectively). A constitutive model of series form for a porous material and a modified ZWT constitutive model for a visco-elastic material were adopted for Fe/ER-17 and Fe/ER-90, respectively. The constitutive relationships developed captured the dynamic compressive characteristics of the two materials.

Study on the Mechanical Behavior of Porous Iron Alloy at High Strain Rates

Experimental Investigations to Yield Stresses Of Porous Materials Made Of Iron Alloy And Bronze

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

Study on braking strain of porous metals with high porosity

Theoretical Modeling of Temperature, Strain Rate and Porosity Dependent Yield Strength of Porous Metallic Material

Dynamic response for porous epoxy resin matrix composites filled with iron powder at different strain rates and constitutive relationships

Strain Rate Effects on the Mechanical Properties of an AlCoCrFeNi High-Entropy Alloy

Dynamic deformation behavior and mechanical properties of porous titanium: Coupling effect of high temperature and high strain rate

Rate Dependent Rheological Stress-Strain Behavior of Porous Nanocrystalline Materials

The Numerical Simulation for High Temperature Creep of the Porous Cu Alloy

Research and Revise on Constitutive Equation of 7050-T7451 Aluminum Alloy in High Strain Rate and High Temperature Condition

Dynamic Plastic Experiments and Constitutive Model of 2024 Aluminum under High Temperature and High Strain Rate

On the Constitutive Models for Ultra-High Strain Rate Deformation of Metals

Effects of High Strain Rate on Mechanical Properties of As-extruded AZ61 Magnesium Alloy

Investigation on Compressive Behavior of Cu-35Ni-15Al Alloy at High Temperatures

Effect of Strain Rate and Temperature on Dynamic Mechanical Behavior and Microstructure Evolution of Ultra-High Strength Aluminum Alloy

Study of fabricating technology of a porous aluminum alloy

Effect of Material Anisotropy on the Mechanical Response of Automotive Steel under High Strain Rates

Strain Rate Dependence of Strengthening Mechanisms in Ultrahigh Strength Lath Martensite

Dynamic mechanical response and a constitutive model of Fe-based high temperature alloy at high temperatures and strain rates