Abstract:Many different practical constitutive models have been proposed for saturated fractured porous media, where the number of model parameters equals the number of constitutive state variables. However, none has considered the fully coupled deformation and hydromechanical behavior between pore and fracture domains. To address this issue, first, composite effective stresses are proposed as stress state variables based on the mixture theory, the nesting idea and the symmetrical formal role of pores and fractures. These variables can consider the interaction between the pore and fracture domains. Second, composite skeleton strains, which are energy-conjugate to the composite effective stresses, are derived from the first law of thermodynamics. Assuming the strain state variable solely depends on its conjugate stress state variable, the linear isotropic elastic equations of solid are derived by free energy potential function. The constitutive equations of fluid are derived using mass conservation equations and the constitutive equations of composite skeleton. Third, the approaches for measuring parameters of the model are introduced from the experiments on intact rock and joints, separately. Finally, the developed constitutive equations are compared theoretically and numerically with the Wilson & Aifantis model and the Khalili & Valliappan model. A parameters sensitivity analysis of the model is then conducted. The modelling results show that there are some differences in the initial fluid pressure magnitude, dissipation patterns, and final settlement of the model proposed in this paper compared to the other two models. Increasing permeability ratio facilitates a faster dissipation rate of fluid pressure in both pores and fractures, enhancing the consolidation rate of the rock mass. Increasing the shape factor facilitates the dissipation of pore fluid pressure and promotes settlement within a specific range.

Preliminary Examination of the Modified Lower-Bound Meso-Damage Constitutive Model for Porous Materials

Lower-bound and Upper-bound Rigid-plastic Constitutive Models for Porous Materials. Comparison and Examination.

Improved Method of Giuffre-Menegotto-Pinto Hysteretic Constitutive Model

LRI Model Lower-Bound Rigid-Plastic Constitutive Model for Isotropic-Hardening Materials with Micro Void Evolution Process.

Examination on the Rigid-Plastic Meso-Damage Constitutive Theory for Particle Reinforced Composites

Upper-Bound Rigid-Plastic Constitutive Model for Mixed-Hardening Materials with Micro Void Evolution Process

Deformation and Damage Characteristics of Porous Materials under Different Triaxialities

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Rigid-plastic Meso-Damage Constitutive Theory for Porous Composites Reinforced by Particles

An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations

A Constitutive Theory for the Damage of Materials with Dynamic Micro Void Evolution Processes.

A Practical Constitutive Model of Saturated Fractured Porous Rock Mass Considering the Fully Coupling Between the Pore and Fracture Domains

AN ELASTOPLASTIC CONSTITUTIVE MODEL FOR POROUS MATERIALS

Damage and forming limit analysis in porous ductile sheet metals at room or elevated temperatures

Rigid plastic constitutive theory for porous materials including void evolution and mixed hardening effects

A MECHANICAL MODEL OF POROUS MEDIA AND ITS APPLICATION IN CEMENT MATERIALS

Numerical analysis of concrete under a wide range of stress and with different saturation condition

A Continuum Damage Model for Multi-Axial Low Cycle Fatigue of Porous Sintered Metals Based on the Critical Plane Concept

Rigid–plastic Constitutive Theory for Normal Anisotropic and Planar Isotropic Sheet Metals with Voids

A size-dependent ductile fracture model: Constitutive equations, Numerical implementation and Validation

A Yield Criterion for Porous Crystalline Materials with Inner Pressure