Abstract:The study of constitutive model is of great significance to engineering safety evaluation and geological disaster prevention. In this paper, rock materials were regarded as a composite geological material composed of voids and rock matrix, and then a piecewise constitutive model bounded by the yield point was proposed. It can reflect the complete stress–strain curves of rocks, including the compaction stage, the elastic stage, the plastic yield stage and the post-peak stage. Primarily, an objective method to determine the yield point based on the stress difference was proposed. For the rock deformation before yielding, the relationship between the strain of rock materials and the strains of voids and rock matrix was analyzed to establish the corresponding constitutive model. Subsequently, based on the modified Weibull distribution, a damage statistical constitutive model of rocks was established to describe the nonlinear deformation after the yield point. Meanwhile, the determining method of model parameters was given. Finally, the uniaxial and triaxial compression test data of different types of rocks were used to verify the proposed model. The results indicate that the model curves are in good agreement with the experimental results. Hence, it is feasible and reasonable to divide the macroscopic strain of rocks into the strains of voids and rock matrix. Additionally, there is a power function attenuation relationship between the deformation ratio of voids to rock matrix and the axial stress.

LRI Model Lower-Bound Rigid-Plastic Constitutive Model for Isotropic-Hardening Materials with Micro Void Evolution Process.

Upper-Bound Rigid-Plastic Constitutive Model for Mixed-Hardening Materials with Micro Void Evolution Process

Lower-bound and Upper-bound Rigid-plastic Constitutive Models for Porous Materials. Comparison and Examination.

A Constitutive Theory for the Damage of Materials with Dynamic Micro Void Evolution Processes.

Rigid plastic constitutive theory for porous materials including void evolution and mixed hardening effects

Preliminary Examination of the Modified Lower-Bound Meso-Damage Constitutive Model for Porous Materials

Deformation and Damage Characteristics of Porous Materials under Different Triaxialities

Dynamic Yield Loci of A Porous Visco-plastic Material by Using A lower Bound Approach

Rigid–plastic Constitutive Theory for Normal Anisotropic and Planar Isotropic Sheet Metals with Voids

Rigid-plastic Meso-Damage Constitutive Theory for Porous Composites Reinforced by Particles

Research on the Constitutive Relation of Geomaterials Based on the Theory of Internal Variable

A Phenomenological Intra-Laminar Plasticity Model for FRP Composite Materials

Influences of Initial Porosity, Stress Triaxiality and Lode Parameter on Plastic Deformation and Ductile Fracture

Constitutive Modeling of Rock Materials Considering the Void Compaction Characteristics

A Yield Criterion for Porous Crystalline Materials with Inner Pressure

A hardening/softening elasto-plastic constitutive model for soils

A Non-Orthogonal Fractional Plastic Damage Constitutive Model for Porous Rock-Like Materials Considering Porosity Evolution

On the Deformation and Fracture of Porous Materials

An Experimental Investigation and an Elastoplastic Constitutive Model for a Porous Rock

Scale-dependent Plasticity Potential of Porous Materials and Void Growth

Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media