Abstract:The tribological behavior of Mo-sprayed piston r ing sliding against grey cast iron cylinder liner under the lubrication of a ful ly formulated petroleum based engine oil SJ/5W-30 containing molybdenum dithioc arbomate (MoDTC) or molybdenum dithiophosphate (MoDTP) was investigated with an Optimol-SRV test rig. The testing temperatures were controlled at 125 ℃ and 32 0 ℃ to simulate the real engine operating conditions.The worn surfaces of the p iston ring and cylinder liner were observed and analyzed by means of scanning el ectron microscopy (SEM) and X-ray photoelectron spectroscopy(XPS). It was obser ved that the frictional behavior of both MoDTC and MoDTP depends heavily on the experimental temperature; MoDTC is effective in decreasing the friction coeffici ent and wear rate at a relatively extended test duration while MoDTP shows frict ion-reduction ability only at relatively high temperatures. It can be seen from the SEM observations of the worn piston ring and cylinder liner surfaces that t he set test temperature range has also strong impact on both the wear severity a nd the wear mechanisms in the contact surface. When it rises from 125 ℃ to 320 ℃, the wear becomes more serious, and the wear mechanism changes from abrasion to adhension. In addition, the chemical interaction between the lubricant conta ining organo-molybdenum and the tribocontact surfaces plays a crucial role in f riction reducing or antiwear film formation, which is dependent on the tribochem ical characteristics of the active ferrous materials and the applied friction mo difiers such as MoDTC or MoDTP. XPS analysis of the worn cylinder liner surfaces indicates that the resultant tribochemical films are mainly composed of iron ox ides, molybdenum oxide, iron sulfide, molybdenum disulfide, and zinc and iron ph osphates. The proportion of these species is a function of both the specific fri ction modifiers used and the experimental temperature. It is supposed that the b etter friction-reduction and wear-resistant actions of MoDTC at 125 ℃ is attr ibuted to the higher content of MoS2 and other wear-resistant compounds gener ated on the worn cylinder liner surfaces.

Frictional behavior and tribo-carbonization of a synthetic engine oil (SJ/CF/5W-30) with different tribo-materials under stepwise heating conditions

Tribocarbonisation of a Synthetic Engine Oil in Lubricated Piston Ring/cylinder Bore Sliding Contact and Its Relation to Friction and Wear

Effect of Frictional Pair Materials on Tribological Behavior of Molybdenum Dithiocarbomate As an Additive

Impacts of Tribochemical Interaction on Lubricating Durability of Engine Oil

Effect of MoDTC and MoDTP on Tribological Behavior of Cylinder Liner/Piston Ring

Tribochemical interactions of piston ring coatings with molybdenum dithiocarbomate friction modifier

Influence of Oxidative Degradation of Lubricant and Anti-Friction Modifier on Tribological Behavior of Cylinder Liner/Piston Ring

Understanding the Effect of Oil-Based Lubricants on the Tribological Behavior of Fe–Cr Alloys from Reactive Molecular Dynamics

Insight into the tribological performance and mechanisms of MoN-Ag/oil solid-liquid lubrication system based on catalytic effect

A Study of Tribological Performance and Tribo-Induced Graphitization of Meso-Carbon Microbeads

Tribochemical synthesis of functionalized covalent organic frameworks for anti-wear and friction reduction

Tribological Performance of Three Advanced Piston Rings in the Presence of MoDTC-modified GF-3 Oils

In-situ tribo-induced formation of superb lubricious carbon-based tribofilms on the catalytical active MoN-Ag film surfaces

Friction control by load-induced structure modification of overbased detergent in fully formulated lubricant

Tribological characteristics of JS material under the lubrication of different lubricant media

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Tribological Properties of a Sliding Joint with an a-C:H:W Coating under Lubrication Conditions with PAO8 Oil and the Addition of 2% MoS2 Nanoparticles

The Tribological Characteristics Of Js Material Under Lubrication Of Oil

Tribological studies of lubricated textured point contacts using MoS2 and PTFE nano oils under the reciprocating motion

Synergy Study Between a Lubricant Oil Layer and a Microstructural Graphite to Reduce Friction and Wear of a Thermally Modified Low-Carbon Gray Cast-Iron Cylinder Liner

Tribological Analysis of a Hydrodynamic Journal Bearing under the Influence of Synthetic and Biolubricants