Abstract:Polymer nanocomposite foams have received considerable attention because of their potential use in advanced applications such as bone scaffolds, food packaging, and transportation materials due to their low density and enhanced mechanical, thermal, and electrical properties compared to traditional polymer foams. In this study, silica nanofillers were used as nucleating agents and supercritical carbon dioxide as the foaming agent. The use of nanofillers provides an interface upon which CO 2 nucleates and leads to remarkably low average cell sizes while improving cell density (number of cells per unit volume). In this study, the effect of concentration, the extent of surface modification of silica nanofillers with CO 2 -philic chemical groups, and supercritical carbon dioxide process conditions on the foam morphology of poly(methyl methacrylate), PMMA, were systematically investigated to shed light on the relative importance of material and process parameters. The silica nanoparticles were chemically modified with tridecafluoro-1,1,2,2-tetrahydrooctyl triethoxysilane leading to three different surface chemistries. The silica concentration was varied from 0.85 to 3.2% (by weight). The supercritical CO 2 foaming was performed at four different temperatures (40, 65, 75, and 85°C) and between 8.97 and 17.93 MPa. By altering the surface chemistry of the silica nanofiller and manipulating the process conditions, the average cell diameter was decreased from 9.62 ± 5.22 to 1.06 ± 0.32 μ m, whereas, the cell density was increased from 7.5 ± 0.5 × 10 8 to 4.8 ± 0.3 × 10 11 cells/cm 3 . Our findings indicate that surface modification of silica nanoparticles with CO 2 -philic surfactants has the strongest effect on foam morphology.

Microcellular Pp-Caco3 Nanocomposites: Relationship Between Nanocomposite Morphology And Foam Morphology

Preparation of Poly(propylene Carbonate)/nano Calcium Carbonate Composites and Their Supercritical Carbon Dioxide Foaming Behavior

Preparation of Cellulose/MWCNTs/TPU Micro-foam Composites

Microcellular Foaming of Polypropylene/Clay Nanocomposites with Supercritical Carbon Dioxide

Preparation and Supercritical CO2 Foaming of Modified Nanocrystalline Cellulose Reinforced Polylactic Acid Bionanocomposites

Research on properties and cellular structure of nano‐CaCO3/rice‐husk fiber/polypropylene three‐phase thermoplastic microcellular foaming composites

Study on Foaming Properties of PLA/NCC Microcellular Foam Materials

Experiment and Simulation of Foaming Injection Molding of Polypropylene/nano-Calcium Carbonate Composites by Supercritical Carbon Dioxide

Fabrication of Polystyrene/nano‐caco3 Foams with Unimodal or Bimodal Cell Structure from Extrusion Foaming Using Supercritical Carbon Dioxide

Physical Properties of Microcellular Polymeric Foams with Supercritical CO2

Investigation on Foamed PP/Nano-CaCO3 Composites in a Combined in-Mold Decoration and Microcellular Injection Molding Process

Biodegradable and Ultra-High Expansion Ratio PPC-P Foams Achieved by Microcellular Foaming Using CO2 as Blowing Agent

Fabrication And Cell Morphology Of A Microcellular Poly(Ether Imide)-Carbon Nanotube Composite Foam With A Three-Dimensional Shape

Batch Foaming of Carboxylated Multiwalled Carbon Nanotube/Poly(Ether Imide) Nanocomposites: the Influence of the Carbon Nanotube Aspect Ratio on the Cellular Morphology

Characterization of carbon nanofibre-reinforced polypropylene foams

In-depth investigation of how carbon nanofiller dispersion affects microcellular foaming behavior in poly(butylene succinate) nanocomposites

Controlling Foam Morphology of Poly(methyl methacrylate) via Surface Chemistry and Concentration of Silica Nanoparticles and Supercritical Carbon Dioxide Process Parameters

Using the Mass Method to Produce PVC/Clay Nanocomposite Foams: The Effect of Nano-clay and Foaming Conditions on Density and Cell size

Study on Extrusion Foaming of Polypropylene with Supercritical CO2 As Foaming Agent

Fabrication of Highly Interconnected Poly(ε-caprolactone)/cellulose Nanofiber Composite Foams by Microcellular Foaming and Leaching Processes

Study on Continuous Extrusion Foaming of PP/PS/Nano-clay with Supercritical CO_2