Abstract:ABSTRACT Organo‐modified nanoclay (Cloisite 30B) was added via direct melt mixing to the acrylonitrile butadiene rubber/poly(vinyl chloride) (PVC/NBR) to fabricate polymer blend/clay nanocomposites. The states of nano‐fillers dispersion were investigated by transmission electron microscopy (TEM) and X‐ray diffraction (XRD). From the morphological study of nanocomposites, it is concluded that exfoliated morphology is obtainable by introduction of 2.5 vol % of nanoclay. The effect of nano‐filler volume content on the mechanical properties of PVC/NBR matrix reinforced by Cloisite 30B was investigated by tensile test. Experimental results show that the Young's modulus and tensile strength of composites can significantly improved with a small amount of nanofiller. Moreover, to investigate the stress–strain behavior of NBR/PVC nanocomposites, seven constitutive models such as Arruda–Boyce, Mooney–Rivilen, Marlow, second order of polynomial, Van der Waals, and third order Odgen were studied and compared with experimental data. Results showed that Malow and second order polynomial model can be used for nanoclay‐filled compound whereas the other models show more deviation from experimental data. Three micromechanical models named liner rule of mixtures (LROM) and the inverse rule of mixtures (IROM). Halpin–Tsai theory was applied to evaluate the dependence of Young modulus of nanocomposites on volume fraction of nanofiller. Two modifying factors were proposed to evaluate the Young's modulus of nanocomposites which could greatly improve the theoretical prediction obtained from inverse rule of mixtures (IROM) and Halpin–Tsai equation. The modifying factors were introduced by adopting an exponential, power‐law and linear factors in the equation. In order to verify the suitability of the modified models, the ensuing theoretical predictions are compared to the other experimental data available in the literature. Good predictability of the modified models is demonstrated in the results. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3229–3239, 2013

Using the Mass Method to Produce PVC/Clay Nanocomposite Foams: The Effect of Nano-clay and Foaming Conditions on Density and Cell size

Effect of Clay Surfactant Type and Clay Content on the Rheology and Morphology of Uncured Fluoroelastomer/clay Nanocomposites Prepared by Melt‐mixing

A simple method for preparation of polymer microcellular foams by in situ generation of supercritical carbon dioxide from dry ice

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Preparation of Cellulose/MWCNTs/TPU Micro-foam Composites

Effects of nano-clay content, foaming temperature and foaming time on density and cell size of PVC matrix foam by presented Least Absolute Shrinkage and Selection Operator statistical regression via suitable experiments as a function of MMT content

The effect of nano‐clay filler addition on the foaming and mechanical properties of polypropylene

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Controlling Foam Morphology of Poly(methyl methacrylate) via Surface Chemistry and Concentration of Silica Nanoparticles and Supercritical Carbon Dioxide Process Parameters

Preparation and Supercritical CO2 Foaming of Modified Nanocrystalline Cellulose Reinforced Polylactic Acid Bionanocomposites

The relationship between cellular microstructure and the mechanical properties of styrene/methyl methacrylate copolymer‐silica nanocomposite foams prepared by a supercritical CO2 blowing agent

Preparation and Density Control of Pmma Microcellular Foams Via Supercritical Carbon Dioxide Foaming

Dynamic Molecular Simulation of Polyethylene/Organoclay Nanocomposites for Their Physical Properties and Foam Morphology

Ultralight cellulose nanofiber based foams: the effects of material formulation and nanofiber type on mechanical properties and thermal insulation

Effect of Plasticizer on the Morphology and Foaming Properties of Poly(vinyl alcohol) Foams by Supercritical CO2 Foaming Agents

Characterization of carbon nanofibre-reinforced polypropylene foams

Nanocellular Foaming Behaviors of Chain-Extended Poly(lactic acid) Induced by Isothermal Crystallization

Study on Foaming Properties of PLA/NCC Microcellular Foam Materials

Study on Extrusion Foaming of Polypropylene with Supercritical CO2 As Foaming Agent

Modification of Theoretical models to predict mechanical behavior of PVC/NBR/organoclay nanocomposites

Research on properties and cellular structure of nano‐CaCO3/rice‐husk fiber/polypropylene three‐phase thermoplastic microcellular foaming composites