Abstract:Since obtaining a highly oriented structure based on a large-scale commercial ultra-high molecular weight polyethylene (UHMWPE) is considered very difficult due to its high molecular weight and melting index, modifying the structure of these cheap commercial UHMWPE brands into a supra-molecular structure with fiber-forming properties by adding a small amount of polyethylene wax (PE-wax) will provide the possibility to obtain highly oriented UHMWPE products with enhanced mechanical and tribological properties. In this work, highly oriented UHMWPE/PE-wax films were prepared. The PE-wax affected the UHMWPE as an intermolecular lubricant. The obtained lamellar structure of the UHMWPE/PE-wax composites had a better processability. The UHMWPE and UHMWPE/PE-wax structures for the xerogels and the films were studied by using differential scanning calorimetry and scanning electron microscopy. The PE-wax presence enhanced the mechanical properties of the UHMWPE/PE-wax films to a high degree. The highest average value of the tensile strength was 1320 MPa (an increase of 78%) obtained by adding a PE-wax content of 1.0 wt.%, and the highest average value of the Young's modulus was 56.8 GPa (an increase of 71%) obtained by adding a PE-wax content of 2.0 wt.%. The addition of the PE-wax increased the work of fracture values of the UHMWPE/PE-wax films up to 233%. The formation of the cavities was observed in the virgin UHMWPE films more than in the UHMWPE/PE-wax films, and the whitening of the oriented films was related to the crystallization process more than to the cavitation phenomenon. The coefficient of friction of the oriented UHMWPE/PE-wax films improved by 33% in comparison with the isotropic UHMWPE, and by 7% in comparison with the oriented virgin UHMWPE films.

EFFECT OF ULTRASONIC FIELD ON RHEOLOGY AND TENSILE BEHAVIOR OF UHMWPE

Investigation of mechanical and wear properties of kaolin filled UHMWPE composites

ADVANCE IN RESEARCH FOR THE EFFECT OF THE ULTRASONIC FIELD ON THE PROCESSING OF POLYMER

Effect of PEW and CS on the Thermal, Mechanical, and Shape Memory Properties of UHMWPE

Influence of rotation speed on abrasive wear behavior of the UHMWPE in lubrication environment

"Like binding a book": Interfacial improvement of pre-melted ultrahigh molecular weight polyethylene by pulse vibration molding

Study on Structures and Properties of Ultra-Hot Drawing UHMWPE Fibers Fabricated Via Dry Spinning Method

Improved Performance and Crystallization Behaviors of Bimodal HDPE/UHMWPE Blends Assisted by Ultrasonic Oscillations

Study on fluidity and mechanics performance of UHMWPE/HDPE composite material

An Investigation on Tribological Properties and Mechanical Properties of UHMWPE/polycrystalline Mullite Fiber

HDPE/UHMWPE in Vibration Field and Property of Its Blown Film

Dynamic Rheological Behavior of Hdpe/Uhmwpe Blends

Study on tribological properties of UHMWPE irradiated by electron beam with TMPTMA and TPGDA as crosslinking agents

Effect of Ultrasound on Wetting Behavior Between Aramid Fiber and Epoxy Resin

Influence of molecular weight on molding efficiency and properties of sintered UHMWPE thick-size products

The mechanical properties of the ultra high molecular weight polyethylene grafted with 3-dimethy (3-(N-methacryamido) propyl) ammonium propane sulfonate

Effect of Entangled State of Nascent UHMWPE on Structural and Mechanical Properties of HDPE/UHMWPE Blends

The Structural and Mechanical Properties of the UHMWPE Films Mixed with the PE-Wax

A Comprehensive Review of Ultrahigh Molecular Weight Polyethylene Fibers for Applications Based on Their Different Preparation Techniques

Evolution of the cavity structure of HDPE/UHMWPE blends during cold stretching

Effect of Hot-Pressing Process on Mechanical Properties of UHMWPE Fiber Non-Woven Fabrics