Influence of molecular weight on molding efficiency and properties of sintered UHMWPE thick-size products

Huixuan Liu,Peng Dong,Quan Li,Ke Wang,Qin Zhang,Qili Li

DOI: https://doi.org/10.1007/s10965-021-02690-z

IF: 3.061

2021-07-31

Journal of Polymer Research

Abstract:Ultra-high molecular weight polyethylene (UHMWPE) is a kind of high performance polymer. But sintering-Molded UHMWPE thick products have the problems of long processing time and structural heterogeneity in products. Here, we compared the time required to complete sintering of UHMWPE thick products with different molecular weights, and found that the higher the molecular weight, the longer the time it took to complete sintering. With the increase of sintering time, the homogeneity of UHMWPE thick products can be improved continuously and will reach a saturation state, at which increasing the sintering time will not change various properties of the products. We compared several kinds of properties of UHMWPE thick products with different molecular weights and found that with the increase of molecular weight, the hardness, Young's modulus, tensile strength, and yield strength of the products barely change, but the elongation at break and the impact strength decrease. Finally, we attribute this phenomenon to the thickness increase of amorphous region.

polymer science

What problem does this paper attempt to address?

This paper aims to explore the influence of molecular weight on processing efficiency and product performance during the sintering molding process of ultra - high - molecular - weight polyethylene (UHMWPE) thick products. Specifically, the researchers focused on the following aspects:

1. **Influence of molecular weight on sintering time**: It was found that as the molecular weight of UHMWPE increases, the time required to complete sintering also correspondingly lengthens. This is because the high - molecular - weight UHMWPE chain segments have a slower migration speed, resulting in a longer time required for the contact and fusion process between powder particles.

2. **Influence of sintering time on product uniformity**: As the sintering time increases, the uniformity of UHMWPE thick products will gradually improve and eventually reach a saturated state. In this state, further increasing the sintering time will not significantly change the various performance indicators of the product.

3. **Influence of molecular weight on mechanical properties**: The researchers compared the hardness, Young's modulus, tensile strength and yield strength of UHMWPE thick products with different molecular weights and found that these performance indicators do not change much with the increase of molecular weight. However, the elongation at break and impact strength decrease as the molecular weight increases. This is mainly because high - molecular - weight UHMWPE has a higher entanglement density, which hinders the movement ability of chain segments, thus affecting the toughness and impact absorption capacity of the material.

4. **Influence of the thickness of the amorphous region**: Through small - angle X - ray scattering (SAXS) tests, the researchers found that as the molecular weight increases, the thickness of the amorphous region increases, which also explains why the impact strength decreases.

In summary, this paper mainly solves the problem of how to improve the processing efficiency and performance of UHMWPE thick products by optimizing molecular weight and sintering time. These research results have important guiding significance for selecting appropriate molecular weights and sintering parameters in actual production.