Abstract:Rigid polyurethane foams (RPUFs) were successfully modified with different weight ratios (0.5 wt%, 1 wt%, 2 wt%) of nanosilica and nanosilica suspension (nanosilica-enhanced with ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, [bmim][PF6]). The resulting foams were evaluated by their processing parameters, chemical structure (Fourier Transform Infrared Spectroscopy Analysis, FTIR), morphology (Scanning Electron Microscopy Analysis, SEM), mechanical properties (compressive test, three-point bending test), viscoelastic behavior (Dynamic Mechanical Analysis, DMA), thermal property (Thermogravimetric Analysis, TGA, thermal conductivity) and application properties (water absorption, dimensional stability). The results showed that the morphology of modified foams is significantly affected by the type of the filler and filler content, which resulted in inhomogeneous, irregular, large cell shapes and further affected the physical and mechanical properties of resulting materials. RPUFs modified with nanosilica suspension represent better mechanical and thermal properties comparing to the RPUFs modified with pure nanosilica. The results showed that the best results were obtained for RPUFs modified with 1 wt% of nanosilica suspension. In comparison with unfilled foam, compositions modified with 1 wt% of nanosilica suspension provide higher density (44 kg/m3), greater compression strength (258 kPa measured parallel and 162 kPa measured perpendicular), and lower thermal conductivity (0.026 W/m·K). The results obtained in this study suggest that the introduction of nanosilica and nanosilica suspension over a certain optimal level (such as 2 wt%) has a negative effect on the cell morphology, which leads to deterioration of physico-mechanical properties of the modified foams.

MORPHOLOGY AND PROPERTIES OF NYLON-1010 POWDER FILLED RIGID POLYURETHANE FOAMS

Morphology and Mechanical Properties of Nylon-1010-Filled Rigid Polyurethane Foams

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

PREPARATION AND MORPHOLOGY OF HYBRID REINFORCED RIGID POLYURETHANE FOAM WITH FIBER AND PARTICLE

Progress of Research on Cell Structure and Properties of Particle Reinforced Rigid Polyurethane Foams

Morphology Development of High‐density Rigid Polyurethane Foam Upon Compression by On‐line Scanning Electronic Microscope

Morphology and Property of Expanded Graphite Filled Rigid PU Foam

Functional nano‐fillers in waterborne polyurethane/acrylic composites and the thermal, mechanical, and dielectrical properties

Effects of Inorganic Fillers on the Flame‐retardant and Mechanical Properties of Rigid Polyurethane Foams

Composites of rigid polyurethane foams and silica powder filler enhanced with ionic liquid

Mechanical properties of polyurethane foams filled by micro-spheres

Cell Structure Control and Performance of Rigid Polyurethane Foam with Lightweight, Good Mechanical, Thermal Insulation and Sound Insulation

Enhanced mechanical and thermal properties of rigid polyurethane foam composites containing graphene nanosheets and carbon nanotubes

Polyurethane Nanocomposites with Open-Cell Structure Modified with Aluminosilicate Nano-Filler

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Macroscopic and Microscopic Mechanical Properties of Polyurethane Syntactic Foams Filled with Hollow Microspheres

Effects of cellulose micro and nanocrystals on the mechanical, thermal, morphological, and structural properties of rigid polyurethanes

Effect of shape and size of nanofillers on the viscoelasticity of polymer nanocomposites

Mechanical Properties of Rigid and Flexible Polyurethane Foam In-Situ Foamed Nomex Honeycomb