Abstract:Rigid polyurethane foams (RPUFs) were successfully modified with different weight ratios (0.5 wt%, 1 wt%, 2 wt%) of nanosilica and nanosilica suspension (nanosilica-enhanced with ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, [bmim][PF6]). The resulting foams were evaluated by their processing parameters, chemical structure (Fourier Transform Infrared Spectroscopy Analysis, FTIR), morphology (Scanning Electron Microscopy Analysis, SEM), mechanical properties (compressive test, three-point bending test), viscoelastic behavior (Dynamic Mechanical Analysis, DMA), thermal property (Thermogravimetric Analysis, TGA, thermal conductivity) and application properties (water absorption, dimensional stability). The results showed that the morphology of modified foams is significantly affected by the type of the filler and filler content, which resulted in inhomogeneous, irregular, large cell shapes and further affected the physical and mechanical properties of resulting materials. RPUFs modified with nanosilica suspension represent better mechanical and thermal properties comparing to the RPUFs modified with pure nanosilica. The results showed that the best results were obtained for RPUFs modified with 1 wt% of nanosilica suspension. In comparison with unfilled foam, compositions modified with 1 wt% of nanosilica suspension provide higher density (44 kg/m3), greater compression strength (258 kPa measured parallel and 162 kPa measured perpendicular), and lower thermal conductivity (0.026 W/m·K). The results obtained in this study suggest that the introduction of nanosilica and nanosilica suspension over a certain optimal level (such as 2 wt%) has a negative effect on the cell morphology, which leads to deterioration of physico-mechanical properties of the modified foams.

Progress of Research on Cell Structure and Properties of Particle Reinforced Rigid Polyurethane Foams

Effect of Surface Modification of Montmorillonite on the Properties of Rigid Polyurethane Foam Composites

Static and Dynamic Behavior of PU Foams with Multilayer Coatings

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Fabrication, mechanical properties, and multifunctionalities of particle reinforced foams: A review

PREPARATION AND MORPHOLOGY OF HYBRID REINFORCED RIGID POLYURETHANE FOAM WITH FIBER AND PARTICLE

Thermal Stability and Flame Retardancy of Rigid Polyurethane Foams/Organoclay Nanocomposites

Study on the Mechanical Properties of Hybrid Reinforced Rigid Polyurethane Composite Foam

Cost-Effective Fabrication of Modified Palygorskite-Reinforced Rigid Polyurethane Foam Nanocomposites

Influence of the Microcrystalline Cellulose Dispersion Method on the Structure and Properties of Rigid Polyurethane Foam Composites

Polyurethane Composite Foams in High-Performance Applications: A Review

Study on foaming behavior of block copolymer/inorganic particles co‐construction of toughened epoxy resin foams

Reinforcing urea‐formaldehyde based composite foam by formation of tailored chemical/mechanical interlocking structure

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

Morphological and mechanical behavior of polyurethane/epoxy interpenetrating polymers and its flax fiber‐reinforced composites

Research Progress and Development Demand of Nanocellulose Reinforced Polymer Composites

Mechanical and Insulation Performance of Rigid Polyurethane Foam Reinforced with Lignin-Containing Nanocellulose Fibrils

Composites of rigid polyurethane foams and silica powder filler enhanced with ionic liquid

Advancements in Flame-Retardant Systems for Rigid Polyurethane Foam

Recent advances in fire-retardant rigid polyurethane foam

In Situ Nanofibrillar Polypropylene-Based Composite Microcellular Foams with Enhanced Mechanical and Flame-Retardant Performances