Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Morphological and mechanical behavior of polyurethane/epoxy interpenetrating polymers and its flax fiber‐reinforced composites

Synergetic Improvement of Interlaminar Fracture Toughness in Carbon Fiber/Epoxy Composites Interleaved with PES/PEK-C Hybrid Nanofiber Veils

Unravelling the Influence of Surface Modification on the Ultimate Performance of Carbon Fiber/Epoxy Composites

Study on Mechanical Properties and High-Speed Impact Resistance of Carbon Nanofibers/Polyurethane Composites Modified by Polydopamine

Enhancing interfacial performance of epoxy resin composites via in-situ nucleophilic addition polymerization modification of carbon fibers with hyperbranched polyimidazole

Interlaminar toughening in flax fiber-reinforced composites interleaved with carbon nanotube buckypaper

Improving mechanical, thermal, and erosive wear performance of natural bamboo fibers modified epoxy resin matrix composites

Effect of hybridization on crystallization behavior, mechanical properties, and toughening mechanisms in rubber-modified polypropylene flax fiber composites

Interfacial effects on mechanical properties of interpenetrating phase nanocomposites

The effect of simultaneous fiber surface treatment and matrix modification on mechanical properties of unidirectional ultra-high molecular weight polyethylene fiber/epoxy/nanoclay nanocomposites

Study on mechanical and thermomechanical properties of flax/glass fiber hybrid‐reinforced epoxy composites

Enhancing mechanical properties of an epoxy resin using “liquid nano-reinforcements”

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Construction of interfacial interlocking structure in epoxy composites with enhanced mechanical performance and ultraviolet resistance

Functional nano‐fillers in waterborne polyurethane/acrylic composites and the thermal, mechanical, and dielectrical properties

Toughness and its mechanisms in epoxy resins

A composite nanofiller with a nail column void structure to imitate beetle shell fiber to enhance the impact resistance of polyurethane elastomer

Mechanically robust, corrosion and impact resistance polyimide nanofiber/epoxy composite by mechanochemical fabrication

Evaluation Of Nano-Mechanical Behavior On Flax Fiber Metal Laminates Using An Atomic Force Microscope

Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements

Study on mechanical behaviors and failure mechanism of polyurethane matrix composites inspired by mussel chemistry and arthropod exoskeleton structures under dynamic impact