Abstract:(a) Processes for the preparation of spring‐like air layer structured polyurethane foams;(b) Compressive stress of RPU with strain of 40 % and 75 %;(c) Contact force‐time curve of impacting composite materials;(d) Compressive stress‐strain curve of polyurethane composite foam with double spring‐like air layer structure Due to its exceptional mechanical properties, polyurethane (PU) foam has found wide application in various fields. Microcellular foaming not only reduces weight but also enhances the cushioning properties of PU. However, current foaming methods have limitations in improving performance. Therefore, this study aimed to construct spring‐like sandwich‐structured flexible PU foam composites (SFFCs). These composites were prepared using a two‐step foaming method, utilizing a precise amount of polyol and isocyanate as raw materials, at room temperature (28–35°C). In the preparation process, warp‐knitted spacer fabrics (WKSFs) with spring‐like structures were encapsulated in the middle layer, while the top and bottom layers consisted of PUF (flexible PU foam with different ring radius differences) formed through the foaming process of polyol and isocyanate. The study focused on investigating the influence of the ring radius difference (r = 1, 1.5, 2) and the two‐layer layout (staggered, diagonal, overlapping) of the WKSFs on the compression and cushioning properties. The experimental results revealed a significant improvement in the mechanical properties of the PU with the incorporation of WKSFs. Particularly noteworthy was the excellent cushioning performance exhibited by the two‐layer WKSFs sample, RPUS‐1, in the dynamic impact test. RPUS‐1 absorbed 94.3% of the energy and reduced the impact value to 3921 N, which is 848 N (17.7%) lower than that of PU foam. Furthermore, even after 20 cycles of compression testing, the SFFCs retained excellent compressive properties, with the compressive stress only decreasing from 0.34 to 0.19 MPa. In conclusion, this study expands the application of PU in cushioning, demonstrating their potential in providing improved cushioning properties.

Cell Structure Control and Performance of Rigid Polyurethane Foam with Lightweight, Good Mechanical, Thermal Insulation and Sound Insulation

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Compressive properties and energy absorption of rigid polyurethane foam

Effects of high functionality polyol on the structure and properties of rigid polyurethane foam

Mechanical Performance and Cushioning Energy Absorption Characteristics of Rigid Polyurethane Foam at Low and High Strain Rates

Effect of Fiber Content on Sound Absorption, Thermal Conductivity, and Compression Strength of Straw Fiber-filled Rigid Polyurethane Foams

Thermal Conductivity of Polyurethane Thin Films

Comprehensive Investigation of Stoichiometry–Structure–Performance Relationships in Flexible Polyurethane Foams

Investigation of the properties and structure of semi-rigid closed-cellular polyimide foams with different diamine structures

Progress of Research on Cell Structure and Properties of Particle Reinforced Rigid Polyurethane Foams

Facile fabrication of multifunctional energy-saving building materials with excellent thermal insulation, robust mechanical property and ultrahigh flame retardancy

The Influence of Microstructure on Sound Absorption of Polyurethane Foams Through Numerical Simulation

Synergistic effect of silica aerogels and hollow glass microspheres on microstructure and thermal properties of rigid polyurethane foam

A sophisticated periodic micro-model for closed-cell foam based on centroidal constraint and capacity constraint

Mechanical Properties of Rigid and Flexible Polyurethane Foam In-Situ Foamed Nomex Honeycomb

Pulverized Polyurethane Foam Particles Reinforced Rigid Polyurethane Foam And Phenolic Foam

Two‐step foaming process for fabrication of flexible polyurethane foam composites with spring‐like air‐layer structure

Investigations on the Basic Electrical Properties of Polyurethane Foam Material

Damping Property of Rigid Polyurethane Foam

Microstructure and performances of rigid polyurethane foam prepared using double‐effect baking powder as a foaming agent

Preparation and Properties of Rigid Polyurethane Foam with Flame Retardants