Abstract:Flexible polyimide foams (PIFs) demonstrate a great potential for applications in the fields of thermal insulation, flame retardancy and irradiation tolerance. In this work, mechanically flexible PIFs with anisotropic pore structure were prepared by adopting the copolymerization strategy and microwave-assisted foaming process. The copolymerization reaction was conducted to synthesize polyester ammonium salt (PEAS) precursors using 3,3 ',4,4 '-benzophenone tetracarboxylic acid dianhydride (BTDA) as dianhydride, 4,4 '-diaminodiphenyl ether (ODA) and 4,4 '-diaminodiphenyl sulfone (DDS) as the copolymerized diamines; afterwards, PEAS powders with particle sizes ranging from 100 to 300 mu m were obtained by drying, crushing and sieving treatments, which were used as the feedstock for "bottom-up" microwave-assisted foaming and thermal imidization process, thereby leading to the formation of PIFs with regular three-dimensional near-spherical pores in vertical direction (parallel to the pore growth direction) and the aligned ellipsoidal strip-like pore structure in horizontal direction. The directional growth of foam pores resulted in anisotropic mechanical flexibility and thermal insulation performance. Moreover, PIFs possessed excellent thermal stability and flame retardancy with the initial thermal degradation temperature higher than 545 degrees C and limited oxygen index up to 58.8%. The PIFs exhibited exceptional thermal insulation performance with thermal conductivity values ranging from 0.0276 to 0.0517 W/ (m & sdot;K) between 25 and 300 degrees C. Additionally, the PIFs demonstrated excellent irradiation tolerance, with the mechanical and thermal stability retention rate being above 96% after the irradiation experiment (radiation dosage: 1.15 x 105 Gy) using 60Co source. Thus, lightweight PIFs with superior high temperature thermal insulation performance, flame retardancy and irradiation tolerance were successfully prepared, which showed potential applications in aerospace, medical and nuclear power sectors.

Investigation of the properties and structure of semi-rigid closed-cellular polyimide foams with different diamine structures

Preparation and Properties of High-Temperature-Resistant, Lightweight, Flexible Polyimide Foams with Different Diamine Structures

Fabrication of Rigid Polyimide Foams with Overall Enhancement of Thermal and Mechanical Properties

Fabrication of Rigid Polyimide Foams with Superior Compressive Properties

Structure to Properties Relations of Polyimide Foams Derived from Various Dianhydride Components

Fabrication of Rigid Polyimide Foams with Good Mechanical and Thermal Properties

Fabrication of Rigid Polyimide Foams by Constructing Dual Crosslinking Network Structures

Studies on Polyimide Foams Prepared from Poly(Ester-amine Salt) Precursor Powder

Mechanically flexible polyimide foams with different chain structures for high temperature thermal insulation purposes

Preparation and Dielectric Properties of Polyimide Foams Containing Crosslinked Structures

Preparation and Properties of High Performance Polyimide Foam

Fabrication of Lightweight Polyimide Foams with Exceptional Mechanical and Thermal Properties

Polyimide Foams with Ultralow Dielectric Constants

Fabrication of Thermally Resistant and Mechanically Flexible Polyimide Foams with Anisotropic Pore Structures for Thermal Insulation and Irradiation Tolerance Applications

Fabrication of Rigid Polyimide Foams by Adopting Active Crosslinking Strategy

Microwave-Assisted Foaming of Mechanically Robust Lightweight Polyimide Foams with Anisotropic Pore Structures for Thermal Insulation Applications

Fabrication of multifunctional polyimide foams with co-polymerized benzimidazole moieties for excellent thermal insulation and flame retardancy applications

Preparation and Property of Polyimide Foams

Preparation and performance of a novel polyimide foam

Lightweight Polyimide Composite Foams with Anisotropic Hierarchical Pore Structure for Enhanced Mechanical, Flame Retardancy and Thermal Insulation Purposes

Closed-Cell Rigid Polyimide Foams for High-Temperature Applications: The Effect of Structure on Combined Properties