Abstract:A precise constitutive model is the foundation and key to finite element simulation in material volume forming and the optimization of the hot working process. Hence, to build a precise constitutive model, a method based on a genetic algorithm (GA) for the inverse optimization identification of parameters is presented in this paper. The idea of this method is to continuously adjust the model parameters through GA until the objective function reaches the minimum value. In this study, hot compression experiments were performed on the Gleeble-1500D thermal simulator at temperatures ranging from 800 °C to 1000 °C and strain rates of 0.01 s−1 to 1 s−1. The Arrhenius-type (A-T) model considering strain compensation and the Johnson–Cook (JC) model considering the coupling effects of strain, temperature and strain rate were constructed, respectively, by using the regression method and the parameter inverse optimization identification method. For the purposes of comparing and verifying the reliability of the predictions of the two established constitutive models, the correlation coefficient (R), average absolute relative error (AARE), and relative error (RE) were adopted. The results show that both the optimized A-T model and the optimized JC model have high prediction accuracy. Compared to the optimized JC model, the optimized A-T model demonstrated a higher correlation coefficient, by 0.003, and a lower average absolute relative error, by 1.43%. Furthermore, the relative error distribution of the optimized A-T model was found to be more concentrated than that of the optimized JC model. These results suggest that the A-T model is more appropriate than the JC model for characterizing the high-temperature deformation behavior of Ti6Al4V alloy.

MATERIAL PARAMETER IDENTIFICATION OF SUPERPLASTIC CONSTITUTIVE RELATION

Parameter Identification of Superplastic Constitutive Model Based on Heteroscedastic Maximum Likelihood Estimator

Mechanical Properties and Parameter Determination of Anand Viscoplastic Constitutive Model for Pb-free Solder Alloys

Study on Correlation Between Parameters of "single Factor" Constitutive Model and Temperature for 7050 Aviation Aluminum-Alloy

Superplasticity in Ti–6Al–4V: Characterisation, modelling and applications

Superplastic Constitutive Equation Including Percentage of High-Angle Grain Boundaries as a Microstructural Parameter

Parameter Identification Theory of A Complex Model Based on Global Optimization Method

Combined crystal plasticity simulations and experiments for parameter identification: application to near-β titanium alloy

Superplastic Behavior of a Metastable Β-Type Ti Alloy Governed by Grain Size: Microstructure Evolution and Underlying Deformation Mechanism

Investigation on the Factors Influencing the Thickness Distribution of Superplastic-Formed Components

Identification of material parameters in low-data limit: application to gradient-enhanced continua

Genetic-Algorithm-Based Inverse Optimization Identification Method for Hot-Temperature Constitutive Model Parameters of Ti6Al4V Alloy

Characterization of Material Mechanical Properties Using Strain Correlation Method Combined with Virtual Fields Method

The Constitutive Equation-Based Recrystallization Mechanism of Ti-6Al-4V Alloy during Superplastic Forming

Recent development in the mechanics of superplasticity and its applications

Constitutive parameter identification of 3D printing material based on the virtual fields method

Ductility limit diagrams for superplasticity and forging of high temperature polycrystalline materials

A model for the rate-controlling mechanism in superplasticity

Identification of Dynamic Constitutive Parameters of a High-Strength Steel and Numerical Simulation

K-0514 Study on Super-Plasticity with Grain Slide Model Compared with Plasticity with Crystal Slide Model

Establishment of Simplified Constitutive Relationship for 3J21 Alloy and Its Nano-indentation Test