Abstract:Industries such as orthodontics and athletic apparel are adopting vat photopolymerization (VP) to manufacture customized products with performance tailored through geometry. However, vat photopolymerization is limited by low manufacturing speeds and the trade-off between manufacturable part size and feature resolution. Current VP platforms and their optical sub-systems allow for simultaneous maximization of only two of three critical manufacturing metrics: layer fabrication time, fabrication area, and printed feature resolution. The Scanning Mask Projection Vat Photopolymerization (S-MPVP1) system was developed to address this shortcoming. However, models developed to determine S-MPVP process parameters are accurate only for systems with an intensity distribution that can be approximated with a first order Gaussian distribution. Limitations of optical elements and the use of heterogeneous photopolymers result in non-analytic intensity distributions. Modeling the effect of non-analytic intensity distribution on the resultant cure profile is necessary for accurate manufacturing of multiscale products. In this work, a model to predict the shape of cured features using analytic and non-analytic intensity distribution is presented. First, existing modeling techniques developed for laser and mask projection VP processes were leveraged to create a numerical model to relate the process parameters (i.e. scan speed, mask pattern irradiance) of the S-MPVP system with the resulting cure profile. Then, by extracting the actual intensity distribution from the resin surface, we demonstrate the model's ability to use non-analytic intensity distribution for computing the irradiance for any projected pattern. Using a custom S-MPVP system, process parameters required to fabricate test specimens were experimentally determined. These parameters were then input into the S-MPVP model and the resulting cure profiles were simulated. Comparison between the simulated and printed specimens dimensions demonstrates the model"s effectiveness in predicting the dimensions of the cured shape with an error of 2.9%.

Research on Resin Curing Process in Ultraviolet Rapid Prototyping

Numerical Simulation on Solvent Diffusion during Polymeric Coating Curing Processes

Printing Depth Modeling, Printing Process Quantification and Quick-Decision of Printing Parameters in Micro-Vat Polymerization

Analysis on the ultraviolet curing process of resin‐based glass fiber composites based on finite element mesoscale model

Numerical Simulation of Composite Material Light-Curing Process Based on the Finite Element Analysis Method

Modeling and measurement of curing properties of photocurable polymer containing magnetic particles and microcapsules

Effect of Different Post-Curing Methods on the Degree of Conversion of 3D-Printed Resin for Models in Dentistry

Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing

Study the curing process of composite by numerical model

Research on the Resolution of Micro Stereo Lithography

Simulation of UV curing of photosensitive resins with phase change materials

Characterization and Finite Element Modeling for Thermoset Resin of Carbon Fiber Prepregs During Curing

A cooperative relaxation model with two physical parameters for investigating the temperature and cure dependence of relaxation mechanisms in resins

Effects of post-curing duration on the mechanical properties of complex 3D printed geometrical parts

THREE DIMENSIONAL CURE SIMULATIONS IN RESIN TRANSFER MOLDING PROCESS FOR COMPOSITES MANUFACTURING

Modeling A Scanning-Mask Projection Vat Photopolymerization System For Multiscale Additive Manufacturing

Preparation and Study of Stereolithography Photosensitive Resin Based on 405 Nm Uv Light Source

Mechanics of Shape Distortion of DLP 3D Printed Structures During UV Post-Curing.

Building of Cure Kinetic Model in Modified Bismeleimide Resin During Curing Process

UV-induced frontal polymerization for optimized in-situ curing of epoxy resin for excellent tensile and flexural properties

Can We Use Our Dental Curing Lights to Polymerize Objects Produced with 3D Resin Printer?