Abstract:A prediction model of the welding process of Ti-6Al-4V titanium alloy was established by using the finite element method, which was used to evaluate the phase composition, residual stress and deformation of the welded joints of Ti-6Al-4V sheets with different processes (including tungsten inert gas welding, TIG, and laser beam welding, LBW). The Ti-6Al-4V structures of TIG welding and LBW are widely used in marine engineering. In order to quantitatively study the effects of different welding processes (including TIG welding and LBW) on the microstructure evolution, macro residual stress and deformation of Ti6Al4V titanium alloy sheets during welding, a unified prediction model considering solid-state phase transformation was established based on the ABAQUS subroutine. In this paper, LBW and TIG welding experiments of 1.6 mm thick Ti-6Al-4V titanium alloy sheets were designed. The microstructure distribution of the welded joints observed in the experiment was consistent with the phase composition predicted by the model, and the hardness measurement experiment could also verify the phase composition and proportion. From the residual stress measured by experiment and the residual stress and deformation calculated by finite element simulation of LBW and TIG weldments, it is concluded that the effect of phase transformation on residual stress is mainly in the weld area, which has an effect on the distribution of tensile and compressive stress in the weld area. The overall deformation of the welded joint is mainly related to the welding process, and the phase transformation only affects the local volume change of the weld seam. Importantly, the phase composition and residual stress, which are scalar fields, calculated by the established model can be introduced into the numerical analysis of structural fracture failure as input influence factors.

Modeling Method of the Welding Process Based on Rough Set Theory

Simulation and prediction for welding deformation on welding procedure of hand pallet truck

A complementary approach to experimental modeling and analysis of welding processes: dimensional analysis

Welding Process Carbon Footprint Analysisand Process Parameters Optimization

Modeling and numerical study of the molten pool dynamics during scanning electron beam welding of aluminum alloys: Physical mechanism, prediction and parameter selection

Research on GMAW Based Non-Supporting Thin-Wall Structure Manufacturing

Establishment and Application of Material Models for Numerical Simulation of Welding Process

Model structure reduction of information on welding flexible system

Modeling, optimization and classification of weld quality in tungsten inert gas welding

Efficient finite element approach for modelling of actual welded structures

A high-efficiency welding simulation method based on welding temperature

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Dynamic Modeling of Weld Bead Geometry Features in Thick Plate GMAW Based on Machine Vision and Learning

Prediction and optimization method for welding quality of components in ship construction

Modeling and real-time prediction for complex welding process based on weld pool

Statistical Method to Model the Quality Inconsistencies of the Welding Process

Kinematics Modeling for Arc Welding Robot

A Numerical Simulation Method Considering Solid Phase Transformation and the Experimental Verification of Ti6Al4V Titanium Alloy Sheet Welding Processes

Computational methods for creation materials with required composition and structure

Study on the intelligent model database modeling the laser welding for aerospace aluminum alloy

MATHEMATICAL MODELING OF MICROSTUCTURE AND MECHANICAL PROPERTIES OF STEEL PRODUCTS