Abstract:In this investigation, the welding quality of TC2 titanium alloy with 0.4 mm thickness was predicted using two regression models and an artificial neural network model. The welding current and the voltage between the upper and lower electrodes were obtained using the Rogowski coil and a line voltage sensor. And then the variations of the dynamic resistance curve and the effects of the welding current and welding time on the dynamic resistance signals were investigated. The principal component analysis (PCA) was employed to eliminate the redundant information in the dynamic resistance curve and characterize the shape information of the entire dynamic resistance. A linear regression model quantifying the relationship between the nugget diameter and the principal components was established. The results of the analysis of variance indicated that the performance of this regression equation was very good. Some statistical characteristics of the dynamic resistance signal were also extracted to investigate the relationship between the nugget diameter and dynamic resistance. The results indicated that the regression model established based on the PCA technique was much more robust than the model developed on the basis of the features manually extracted from the dynamic resistance signal. The neural network model was also used to predict the nugget diameter of the welding joints utilizing the extracted features. The performances of the three established prediction models were compared and their behavioral discrepancies were also investigated. The PCA technique not only can minimize the prior assumptions about the certain shape of the dynamic resistance curve and remove the subjective factors caused by the manual extraction method, but it also can assess and monitor the welding quality with a good level of reliability.

Modeling, optimization and classification of weld quality in tungsten inert gas welding

Weld quality control by neural network

Artificial Neural Network for GTAW Modeling and Control

Investigations on quality characteristics in gas tungsten arc welding process using artificial neural network integrated with genetic algorithm

A NEURAL NETWORK FOR WELD PENETRATION CONTROL IN GAS TUNGSTEN ARC WELDING

Optimization of Metal Inert-Gas Welding Process for 5052 Aluminum Alloy by Artificial Neural Network

Process parameter selection for optimizing the weld pool geometry in the tungsten inert gas welding of stainless steel

Neural Network Modeling and System Simulating for the Dynamic Process of Varied Gap Pulsed GTAW with Wire Filler

Achieving Optimal Weld Bead Geometry and Dilution Ratio in Tungsten Inert Gas–Metal Inert Gas Hybrid Welding through ANN-TLBO Algorithmic Optimization

Gas Metal Arc Welding Process Monitoring and Quality Evaluation Using Neural Networks

Welding Quality Evaluation of Resistance Spot Welding Based on a Hybrid Approach

Process Modeling and Parameter Optimization Using Radial Basis Function Neural Network and Genetic Algorithm for Laser Welding of Dissimilar Materials

Modelling and optimization of weld bead geometry in robotic gas metal arc-based additive manufacturing using machine learning, finite-element modelling and graph theory and matrix approach

Neuro-fuzzy based human intelligence modeling and robust control in Gas Tungsten Arc Welding process

Prediction of Welding Quality Characteristics During Pulsed GTAW Process of Aluminum Alloy by Multisensory Fusion and Hybrid Network Model

Neural network modeling for weld shape process of P-GMAW

Intelligent Classification of Tungsten Inert Gas Welding Defects: A Transfer Learning Approach

Neural network modeling for dynamic pulsed GTAW process with wire filler based on MATLAB

Modeling Methods of Weld Pool Dynamics During Pulsed GTAW

Prediction of welding residual stress and deformation in electro-gas welding using artificial neural network

Artificial neural networks applied to spot welding process modeling