Abstract:Welding deformation prediction can predict the deformation that may occur during the welding process, so that corresponding measures can be taken to control the deformation, so as to improve the manufacturing quality and driving safety of the car body. In this paper, the finite element analysis software is used to simulate the welding process of the load wheel flange plate of the special vehicle body. The load wheel flange plate is one of the main components connecting the load wheel and the body, which can reduce the impact caused by uneven ground or high speed driving, so as to protect the load wheel, axle and body system. In this paper, the finite element analysis model of the load wheel flange is established. Based on the finite element analysis method, the welding deformation data set under different welding voltage, welding current and welding speed is obtained. In this paper, the process parameters of orthogonal experimental design are used for welding, and the deformation of the flange plate of the load wheel after welding is measured by three-dimensional laser scanner. The simulation results of welding deformation are in good agreement with the experimental results, and the relative error is controlled within 9.4%. Therefore, the finite element simulation method in this paper can better reflect the actual welding deformation. In order to improve the efficiency and accuracy of welding deformation prediction, a deformation prediction model based on improved genetic algorithm optimized BP neural network(improved GA-BP)is proposed. The average absolute error MAE and the determination coefficient R 2 are used as test parameters to evaluate the accuracy of the established model. The results show that compared with the unimproved BP neural network, the GA-BP model has a 0.04% increase in R 2 and a 13.04% decrease in MAE in the performance of the test set, which has a high reference value for the subsequent improvement of welding quality. Finally, the improved GA-BP algorithm model is used to verify the engineering verification of the flange plate of the load wheel obtained by the welding experiment. Based on the improved GA-BP neural network, the error between the predicted value of the welding deformation and the average value of the experimental measurement is within 10%, and the predicted value is consistent with the experimental measurement value. The application value of the improved GA-BP neural network in engineering is verified.

Prediction of welding residual stress and deformation in electro-gas welding using artificial neural network

The prediction of residual stress of welding process based on Deep Neural Network

Prediction and Compensation of Force-Induced Deformation for a Dual-Machine-based Riveting System Using FEM and Neural Network

Numerical Prediction and Control of Deformation and Residual Stress in Double-Sided Arc Welding of Large Pressure Hull

Prediction system of mechanical properties of welded joints based on artificial neural network

Prediction of residual stresses in welded structures based on neural network: a review

Prediction of laser-welded deformation using artificial neural networks

Prediction of Bead Geometry with Changing Welding Speed Using Artificial Neural Network

Research on Prediction of Welding Deformation Based on Improved GA-BP Neural Network

Prediction of Transverse and Angular Distortions of Gas Tungsten Arc Bead-on-plate Welding Using Artificial Neural Network

Estimation of Residual Stress in Dissimilar Metals Welding using Deep Fuzzy Neural Networks with Rule-Dropout

A Neural Network Model for Predicting the Backside Dimension of Weld Pool During Pulsed Gtaw Process

An Improved Artificial Neural Network for Laser Welding Parameter Selection and Prediction

Genetic Algorithm Coupled with the Neural Network for Fatigue Properties of Welding Joints Predicting

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Prediction Model of Weld Forming Based on Rotating Arc Sensing Method and Neural Network

An Artificial Neural Network Model for Predicting Joint Performance in Ultrasonic Welding of Composites

Welding Quality Evaluation of Resistance Spot Welding Based on a Hybrid Approach

Predicting the Backside Width of Weld Pool During Pulsed Gtaw Process Based on A Neural Network Model

Prediction of Welding Quality Characteristics During Pulsed GTAW Process of Aluminum Alloy by Multisensory Fusion and Hybrid Network Model

Forming For Resistance Spot Welding of Non-thick Dissimilar Steel and Neural Network Prediction