Investigation of Cold-Start Based on Cycle-by-Cycle Control Strategy in a LPG EFI Engine

王振锁,李理光,宫长明,肖宗成,王惠萍,邓宝清

DOI: https://doi.org/10.4271/2004-01-3059

2004-01-01

Abstract:This paper presents an investigation of cold start by the method of single-cycle and multi-cycle combustion analysis in a LPG EFI engine based on cycle-by-cycle control strategy. Experiments were carried out in a four-stroke, water-cooled, single cylinder, 125 mL SI engine with EFI system. Effects of the first injection pulse width and the first firing cycle on the characteristics of cold start were analyzed based on the histories of transient engine speeds and cylinder pressures. The study focuses on how to realize the controllable ignition cycle, and the single-cycle and multi-cycle combustion were tested based on the single starting injection pulse width. Test results showed that: the first firing cycle has an important effect on HC emission and combustion stability during cold-start. The injection pulse width is the key factor for the characteristics of ignition cycle during the cold start. It is possible to realize the ideal ignition cycle, such as injection on time, combustion on time if the first injection pulse width and timing are controlled reasonably. The air fuel ratio of the starting mixture needed by first firing cycle is 2.2 times of that at normal idle condition. When the single starting injection pulse width is applied during cold start, the HC emission is lower than that of multi-cycle starting injection pulse width, and the starting reliability is also better. The first firing cycle can be advanced and the cold starting reliability can be improved when the engine is motored by starter several cycles before the first injection.