Abstract:High concentration coal water slurry (CWS) is a new type of coal based liquid fuel developed and applied to replace oil for direct use in industry since the mid-seventies. Industrial tests of coal water slurry combustion in the 20 tons per hour steam output and 60 tons per hour steam output oil fired boilers have been carried out since 1981 in China. Nowaday, a project of burning coal water slurry in the 230 T/H utility boiler in Baiyanghe power plant has been made and several of the retrofit works have been done. This is the first time in this country. The boiler was originally designed based on burning coal. Actually, it keeps on burning oil. It has a cross-section of high length-width ratio (the long-side and short-side are 10.1 m and 7.15 m respectively, the ratio is 1/1.3). Based on the demand of power plant authority and the particularity of boiler construction, the CWM burners must be arranged on two side walls which are shorter than the front and rear wall. As we know, the length-width ratio of cross-section in a tangential fired furnace is generally suggested to be no more than 1/1.25. However, the ratio of this furnace hasmore » already been 1/1.3. If calculating in terms of burner-located points on furnace walls, the length-width ratio is 1/2.13. This obviously contradicts with general suggestion. No furnace aerodynamic information about this arrangement can be found. This arrangement will cause easily the deflection and impingement of the airflow, and it is difficult to form a good airflow distribution. So the retrofitting and design of the burner on the old boiler are very important. For this purpose, the experimental researches in two cold model facilities were carried out carefully. The experimental projects reported in this paper include the aerodynamic characteristic of two shape burners.« less

A RESEARCH ON ATOMIZATION CHARACTERISTICS OF 6t/h STRIKING-TYPED CWS ATOMAZER

Testing Research on Load Characteristic of Large-capacity ZD Model CWS Atomizer

Testing research on ZD model atomization characteristic of high viscosity liquid

The Atomizing Mechanism of Dz-Type Coal-Water Slurry Atomizer

INVESTIGATION OF ATOMIZATION PERFORMANCE ON A CENTRIFUGAL FUEL SLINGER WITH A PHASE DOPPLER ANEMOMETER

Measurement of Atomization Characteristics on Water Mist Fire Suppression Nozzle

Experimental Reseach on Cold Aerodynamic Characteristic in Hexagonal Arranged CWS Boiler

TEST AND RESEARCH OF IMPACT TYPE MUTISTAGE ATOMIZING NOZZLE FOR COAL-WATER SLURRY

Experimental Research and Numerical Simulation on Combusting CWS in 410t/h Six-corner Tangentially Firing Boiler

Experimental Study of the Effect of Nozzle Structure on Atomizing Performance of a Novel Coal Water Slurry Nozzle

Experimental Study of Atomization and Spray Characteristics of Air-Assisted Coal Water Slurry Nozzle of High Fluid Loading

Study of the Flow Characteristics for the Air-Atomized CWS Nozzle

97/03976 Researches on the aerodynamic characteristics of CWS tangentially arranged burners in utility boilers

Techno/economic Analysis of Gas-assist Atomization Medium

Atomization and Spray Characteristics of a Multi-Stage Airblast Nozzle for Coal-Water Slurry

Experimental and Numerical Simulation Studies on the Atomization Characteristics of the Internal Mixing Nozzle and Its Field Application

Atomization Characteristics of Swirling Steam-based Mechanical Oil Sprayers for a Supercharged Marine Boiler

Airblast Atomization Of The Twin-Fluid Atomizer

Application of Multi-Tangential Firing Technology to Settling the High Temperature Corrosion of Water Wall Tube of Boiler

Experimental Study of the Atomizing Performance of a New Type of Nozzle for Coal Water Slurry

In-situ Atomization and Flame Characteristics of Coal Water Slurry in an Impinging Entrained-Flow Gasifier