Polarization Insensitive and Low-Loss Coupling Mode-Size Converter from Super Luminescent Diode to Silica-Based Planar Lightwave Circuit
She Xuan,Li Bei,Chen Kan,Li Ke,Shu Xiaowu,Liu Cheng
DOI: https://doi.org/10.1117/12.2256294
2017-01-01
Abstract:We present a design of a laterally tapered optical waveguide mode-size converter from super luminescent diode (SLD) to silica-based planar lightwave circuit (PLC). The mode-size converter is based on silica-based PLC. By using three dimensional semi-vectorial beam propagation methods, laterally tapered waveguides with different boundaries are simulated and compared with each other, where the factors of polarization-dependent loss and coupling loss are mainly focused on. The results show that the most influential factor for polarization-dependent loss is the ratio of the divergence angle of SLD in the horizontal direction and the vertical direction. The refractive index difference. between core layer and cladding layer, core width of endface and taper length influence coupling loss mostly, while the effect of all side boundaries is within 0.05 dB. We also investigate the SLD misalignment tolerance and wavelength bandwidth's impact on coupling loss. Furthermore, we examine the performance of the mode-size converter based on a particular SLD which has a divergence angle of 30 degrees x45 degrees. By optimizing the parameters of the tapered waveguide, the coupling efficiency is increased to 62.4% and the polarization-dependent loss is reduced to 0.035 dB. Meanwhile, it enables us to reduce the coupling loss variation to 0.05dB with core width of endface fabrication tolerance of +/- 0.5 mu m and taper length tolerance of +/- 0.5 mm. The proposed mode-size converter has been demonstrated to be well performed, implying its application in the optical transceiver module using SLD as light source and hybrid integration of III-V semiconductor waveguiding devices and PLCs.