Abstract:The advanced direct laser printing of functional devices with tunable effective index is a key research topic in numerous emerging fields, especially in micro-/nano-optics, nanophotonics, and electronics. Photosensitized nanocomposites, consisting of high-index materials (e.g., titanium dioxide, TiO2) embedded in polymer matrix, are emerging as attractive platforms for advanced additive manufacturing. Unfortunately, in the currently applied techniques, the preparation of optically functionalized structures based on these photosensitized nanocomposites is still hampered by many issues like hydrolysis reaction, high-temperature calcinations, and, especially, the complexity of experimental procedures. In this study, we demonstrate a feasible strategy for fabricating micro-/nanostructures with a flexibly manipulated effective refractive index by incorporating TiO2 nanoparticles in the matrix of acrylate resin, i.e., TiO2-based photosensitized nanocomposites. It was found that the effective refractive index of nanocomposite can be easily tuned by altering the concentration of titanium dioxide nanoparticles in the monomer matrix. For TiO2 nanoparticle concentrations up to 30 wt%, the refractive index can be increased over 11.3% (i.e., altering from 1.50 of pure monomer to 1.67 at 532 nm). Based on such a photosensitized nanocomposite, the grating structures defined by femtosecond laser nanoprinting can offer vivid colors, ranging from crimson to magenta, as observed in the dark-field images. The minimum printing width and printing resolution are estimated at around 70 nm and 225 nm, indicating that the proposed strategy may pave the way for the production of versatile, scalable, and functionalized opto-devices with controllable refractive indices.

Growth of nanocomposite colored film with variable refractive index

Optical Properties of Highly Photosensitive Hybrid Sol-Gel Films

Influence of Iron Dopant on Crystallization and Photo-Induced Hydrophilicity of TiO2 Thin Films

Preparation and Characterization of High Refractive Index Thin Films of Tio2/Epoxy Resin Nanocomposites

STUDIES ON PREPARATION AND PROPERTIES OF ORGANIC/INORGANIC HYBRID TRANSPARENT FILMS WITH HIGH REFRACTIVE INDEX

Preparation and Investigation of Sol–Gel TiO2-NiO Films: Structural, Optical and Electrochromic Properties

Preparation and Electrochromic Performance of NiO/TiO2 Nanorod Composite Film

High refractive index organic–inorganic hybrid coatings with TiO2 nanocrystals

Preparation of TiOx-C Nano-Composite Films as Solar Selective Absorbers by Sol-Gel Method

Preparation and Study of Nanocomposite Colored Films

High performance hierarchical nanoporous antireflective films by a facile sol–gel process

3D Laser Nanoprinting of Optically Functionalized Structures with Effective-Refractive-Index Tailorable TiO2 Nanoparticle-Doped Photoresin

Refractive Index Engineering of Polymer Nanocomposites Prepared by End-grafted Polymer Chains Onto Inorganic Nanoparticles

Transparent and High-Refractive-Index Titanium Dioxide/Thermoplastic Polyurethane Nanocomposites

Transparent Epoxy/tio 2 Optical Hybrid Films with Tunable Refractive Index Prepared Via a Simple and Efficient Way

High Refractive Index Films Prepared from Titanium Chloride and Methyl Methacrylate Via a Non-Aqueous Sol–Gel Route

Creation of transparent nanocomposite films with a refractive index of 2.3 using polymerizable silicon nanoparticles

Preparation and characterization of ultrafine neodymium oxide/TiO2/ORMOSIL sol-gel composite thin film

High Refractive Organic–Inorganic Hybrid Films Prepared by Low Water Sol-Gel and UV-Irradiation Processes

Surface Modification of ZrO2 Nanoparticles with TEOS to Prepare Transparent ZrO2@SiO2-PDMS Nanocomposite Films with Adjustable Refractive Indices

A novel route to control refractive index of sol-gel derived nano-porous silica films used as broadband antireflective coatings