Abstract:The use of nanoparticles (NPs) as reinforcements in polymeric coatings allows for direct interaction with the polymeric chains of the matrix, resulting in a synergistic process through physical (electrostatic forces) and chemical interactions (bond formation) for the improvement of the mechanical properties with relatively low weight concentrations of the NPs. In this investigation, different nanocomposite polymers were synthesized from the crosslinking reaction of the hydroxy-terminated polydimethylsiloxane elastomer. Different concentrations (0, 2, 4, 8, and 10 wt%) of TiO2 and SiO2 nanoparticles synthesized by the sol-gel method were added as reinforcing structures. The crystalline and morphological properties of the nanoparticles were determined through X-ray diffraction (XRD), Raman spectroscopy, and transmission electron microscopy (TEM). The molecular structure of coatings was through infrared spectroscopy (IR). The crosslinking, efficiency, hydrophobicity, and adhesion degree of the study groups were evaluated with gravimetric crosslinking tests, contact angle, and adhesion tests. It was observed that the crosslinking efficiency and surface adhesion properties of the different nanocomposites obtained were maintained. A slight increase in the contact angle was observed for the nanocomposites with 8 wt% compared to the polymer without reinforcements. The mechanical tests of indentation hardness and tensile strength following the ASTM E-384 and ISO 527 standards, respectively, were performed. As the nanoparticle concentration increased, a maximum increase of 157% in Vickers hardness, 71.4% in elastic modulus, and 80% in tensile strength was observed. However, the maximum elongation remained between 60 and 75%, ensuring that the composites did not become brittle.

Transparent and High-Refractive-Index Titanium Dioxide/Thermoplastic Polyurethane Nanocomposites

Thermal Stability of Optically Transparent Alpha-Zirconium Phosphate/Poly(methyl Methacrylate) Nanocomposites with High Particle Loading

Controllable Fabrication and Characterization of Porous C/TiO2 Nanocomposite Films As Solar Selective Absorber

Poly(methyl Methacrylate)/silica/titania Ternary Nanocomposites with Greatly Improved Thermal and Ultraviolet-Shielding Properties

Physicochemical characterizations of polyethylene oxide/polyaniline nanocomposite films incorporated with titanium nanoparticles

UV Resistant Properties of Composite Modiifed Nano Titanium Dioxide and Its Application

High Refractive Index Films Prepared from Titanium Chloride and Methyl Methacrylate Via a Non-Aqueous Sol–Gel Route

Preparation and characterization of porous carbon–titania nanocomposite films as solar selective absorbers

Structural, thermal, optical characterizations of polyaniline/polymethyl methacrylate composite doped by titanium dioxide nanoparticles as an application in optoelectronic devices

Research On Preparation, Structure And Properties Of Tio2/Polythiourethane Hybrid Optical Films With High Refractive Index

Synergistic effect of micro- and nano-TiO2 on hydrophobic, mechanical, and electrical properties of hybrid polyurethane composites

The Influence of the Ceramic Nanoparticles on the Thermoplastic Polymers Matrix: Their Structural, Optical, and Conductive Properties

PDMS/TiO2 and PDMS/SiO2 Nanocomposites: Mechanical Properties' Evaluation for Improved Insulating Coatings

Mechanical and Thermal Properties of Nanosized Titanium Dioxide Filled Rigid Poly(vinyl Chloride)

Metal oxide-dispersed PDMS nanocomposite films with enhanced heat-shielding ability and optical transparency

Film formation and mechanical properties of an opaque titanium dioxide and transparent polyvinyl alcohol composite films

Optical and UV Shielding Properties of Inorganic Nanoparticles Embedded in Polymethyl Methacrylate Nanocomposite Freestanding Films

Physical and Barrier Properties of Polylactic Acid/Halloysite Nanotubes-Titanium Dioxide Nanocomposites

Surface Modification of ZrO2 Nanoparticles with TEOS to Prepare Transparent ZrO2@SiO2-PDMS Nanocomposite Films with Adjustable Refractive Indices

3D Printable Plasmonic Titanium Nitride Nanoparticles Enhanced Thermoplastic Polyurethane Composite for Improved Photothermal De-Icing and Infrared Labeling

High Refractive Index Thin Films of ZnS/polythiourethane Nanocomposites