Abstract:The development of new materials is essential for advancing technology and improving the quality of life. With new materials, we can create products that are stronger, more durable, and more efficient. The ongoing research and development of new materials for 3D printing applications continue to drive innovation in various fields, leading to improved products and processes with great benefits. The main goal of this work was to produce a functional filament with a 1.75-mm diameter that may be used for 3D printing. Composite materials were prepared using a low-density polyethylene (LDPE) resin as polymer matrix, and titanium dioxide (TiO2) and carbon nanotubes (CNT) as fillers in various ratios. Up to 15 wt% of TiO2 and 0.25 wt% of CNT were added. Some of the greatest difficulties with high filler content composites are achieving good homogeneity, and in the case of the 3D printing, greatest difficulties are producing the filament with a specific and stable filament diameter. During the 3D printing itself, the fillers can also often cause the nozzle clogging. This paper reports findings of thermal and mechanical properties of the LDPE/TiO2/CNT composites which are significant for the 3D printing process and the applicability of the composite materials. All of the planed composite materials are successfully prepared and 3D printed into the tensile test specimens. The melting point shift caused by the addition of fillers did not show consistent pattern at differential scanning calorimetry, as all of the samples had melting temperatures around 113.5 ± 1.4 °C. The addition of filler, according to the TGA, increased the threshold temperature for the material decomposition, in case of TiO2 5.4 °C increase, while TiO2 and CNT combination increased the threshold temperature for 6.8 °C. The results of the tensile test show a general increase trend with addition of TiO2 filler but do not show to a trend for the tensile strength as a result of the addition of CNT filler. The sample with highest TiO2 filler ratio of 15% (LDPE 15T0C) showed the greatest tensile strength of 14.5 MPa, compared to the 13.0 MPa of pure LDPE. The sample with 5% of TiO2 filler and 0.1% of CNT filler (LDPE 5T0.1C) showed the greatest elongation of 73.9%, compared to the 68.9% of pure LDPE.

3D Printable Plasmonic Titanium Nitride Nanoparticles Enhanced Thermoplastic Polyurethane Composite for Improved Photothermal De-Icing and Infrared Labeling

3D Printing Boron Nitride Nanosheets Filled Thermoplastic Polyurethane Composites with Enhanced Mechanical and Thermal Conductive Properties

Anisotropic Thermal Conductivity of 3D Printed Graphene Enhanced Thermoplastic Polyurethanes Structure toward Photothermal Conversion

Plasmon-mediated photothermal and superhydrophobic TiN-PTFE film for anti-icing/deicing applications

Manufacturing of Conductive Filaments for 3D/4D Printing through In Situ Polymerization of Biobased Thermoplastic Polyurethane/Multiwall Carbon Nanotube Composites

4D printed TPU/PLA/CNT wave structural composite with intelligent thermal-induced shape memory effect and synergistically enhanced mechanical properties

The combination of AlN and h‐BN for enhancing the thermal conductivity of thermoplastic polyurethane composites prepared by selective laser sintering

Rational design of a novel NDI-based thermoplastic polyurethane elastomer with superior heat resistance

Improvement of the Thermal Conductivity and Mechanical Properties of 3D-Printed Polyurethane Composites by Incorporating Hydroxylated Boron Nitride Functional Fillers

3D Printed Thermoelectric Polyurethane/Multiwalled Carbon Nanotube Nanocomposites: A Novel Approach towards the Fabrication of Flexible and Stretchable Organic Thermoelectrics

Thermally Conductive 3D-Printed Carbon-Nanotube-Filled Polymer Nanocomposites for Scalable Thermal Management

Titanium nanoparticles bonded polyacrylates with enhanced properties fabricated using DLP 3D printing

Investigating the thermal and mechanical properties of novel LDPE/TiO2 and LDPE/TiO2/CNT composites for 3D printing applications

Multi-dimensional fillers synergistically enhanced thermal conductivity of TPU composites in selective laser sintering technology

On the substantial mechanical reinforcement of Polylactic Acid with Titanium Nitride ceramic nanofillers in material extrusion 3D printing

Design of 3D printed bioinspired nacre-like structured materials with significantly enhanced thermal conductivity

3D Printing of TPU‐Liquid Metal Composite Inks for the Preparation of Flexible Sensing Electronics

Plasmonic photothermal film for defogging and anti-icing/deicing on PTFE

Extrusion 3D Printing of Intrinsically Fluorescent Thermoplastic Polyimide: Revealing an Undisclosed Potential

Manufacturing of Bio-Based TPU/CNT Composites Using Solvent-Free In-Situ Polymerization for 3D Printing Filament Applications

ZnO nanoparticle-grafted PLA thermoplastic composites for 3D printing applications: Tuning of thermal, mechanical, morphological and shape memory effect