Abstract:Shape memory properties of Poly (L-lactide)/Poly (-caprolactone) (PLLA/PCL) blends reinforced with Multiwalled Carbon Nanotubes (MWCNTs) was investigated. PLLA biodegradable shape memory implants have advantages in repair and regeneration of healing tissues. One of the drawbacks of PLLAs for biomedical applications is their brittleness. One of the most practical strategies for tuning the properties of PLLA is blending with PCL. In this research, we have studied the shape memory and mechanical behavior of MWCNT/PLLA/PCL blends nanocomposites. To avoid aggregation and bundling, MWCNTs were washed with ethanol. The samples with various contents of each component were prepared by solution casting. The microstructure, mechanical properties and shape memory effect of the blends and composites were investigated by means of differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM), polarizing optical microscopy (POM) and tensile testing. The relationship between the microstructure and shape memory properties was illuminated. Differential scanning calorimetry (DSC) of MWCNTs/PLA/PCL blends shows two glass transition temperatures (Tg) and two melting points (Tm) at positions close to the pure components revealing phase separation. The Tg and Tm of composites were increased with increasing the MWCNTs content in composites.. The XRD analysis of prepared composites shows there is a significant increase in PCL crystallization in composites by MWCNTs. The tensile tests results shows that the mechanical strength and shape recovery rate were significantly increased with increasing the MWCNTs contents in composites. The crystallinity of blend was increased with increasing the PCL in composition and in composites also the crystallinity was increased with increasing the amount of MWCNTs. The mechanical behaviour of blends and composites shows large strain after yielding and high elastic strain characteristics and exhibition good shape memory effect in which the PLLA crystal and the PCL amorphous serve as fixed phase and reversible phase, respectively. The shape recovery ratio of blend at first was decreased (15%) with increasing the amount of PCL up to 20wt%, then increased (10%) with increasing the amount of PCL until 40wt%. the shape recovery ratio of composites was increased (15%) with increasing the amount of MWCNTs up to 3wt%.

4D printed TPU/PLA/CNT wave structural composite with intelligent thermal-induced shape memory effect and synergistically enhanced mechanical properties

Mechanical and Shape Recovery Properties of Shape Memory Polymer Composite Embedded with Cup-Stacked Carbon Nanotubes

4D Printing Light-/Thermo-responsive Shape Memory Composites Based on Thermoplastic Polyurethane/polylactic Acid/polyaniline Blends

Preparation of Polylactide/Poly(ether)urethane Blends with Excellent Electro-actuated Shape Memory Via Incorporating Carbon Black and Carbon Nanotubes Hybrids Fillers

3D printing thermo-responsive shape memory polymer composite based on PCL/TPU blends

Fabrication of Thermoplastic Polyurethane/Polycaprolactone Multilayered Composites with Confined Distribution of MWCNTs for Achieving Tunable Thermo- and Electro-Responsive Shape-Memory Performances

Development of Multiwalled Carbon Nanotubes/Halloysite Nanotubes Reinforced Thermal Responsive Shape Memory Polymer Nanocomposites for Enhanced Mechanical and Shape Recovery Characteristics in 4D Printing Applications

Facile preparation of rapidly electro-active shape memory thermoplastic polyurethane/polylactide blends via phase morphology control and incorporation of conductive fillers

Enhanced Shape Memory Property of Polylactide/thermoplastic Poly(ether)urethane Composites Via Carbon Black Self-Networking Induced Co-Continuous Structure

Fabrication of 3D Printed Polylactic Acid/Polycaprolactone Nanocomposites with Favorable Thermo-Responsive Cyclic Shape Memory Effects, and Crystallization and Mechanical Properties

Microstructural Design for Enhanced Shape Memory Behavior of 4D Printed Composites Based on Carbon Nanotube/polylactic Acid Filament

Enhancing shape memory properties of multi-layered and multi-material polymer composites in 4D printing

A novel PLA/P(3HB-co-4HB)/MWCNT composite featuring enhanced mechanical properties and excellent thermal stability based on elongational rheology

Polyurethanes Based on Polylactic Acid for 3D Printing and Shape-Memory Applications

Shape Memory Properties of Poly(L-Lactide) / Poly(ε-Caprolactone) Blends and Their Composites with Carbon Nanotubes

4D Printing of Electroactive Triple-Shape Composites

Advancing Multi-Stimuli 4D Printing of Polylactic Acid with Rapid Shape Memory and Enhanced Toughness Using Lignin-Coated Fe3O4 Nanoparticles

Co-continuous Structure Enhanced Magnetic Responsive Shape Memory PLLA/TPU Blend Fabricated by 4D Printing

Shape Memory Effect of Four-Dimensional Printed Polylactic Acid-Based Scaffold with Nature-Inspired Structure

Effect of Carbon Nanotubes on Shape memory properties of poly (L-lactide)/poly (- caprolactone) blends

Facile Fabrication of Ternary Nanocomposites with Selective Dispersion of Multi-Walled Carbon Nanotubes to Access Multi-Stimuli-responsive Shape-Memory Effects