Abstract:Shape-memory polymers (SMP) composites have attracted significant attention from both industrial and academic researchers due to their useful and fascinating functionality. Generally, SMP can be actuated by heat, electricity, water and chemicals. A large amount of work has been done on the shape recovery of shape memory polymers blended with conductive filler triggered by electrical resistive heating. However, the conductive filler will dramatically undermine the shape memory behavior and there is no effective way to increase the conductivity without compromise on the shape memory behavior. In this work, carbon nanofiber (CNF) paper and bucky paper were introduced to actuate shape memory polymer, respectively. The shape recovery of polymer was carried out by electrical resistive heating generated by CNF paper and bucky paper which were attached to the surface of the SMP composites. Also, both of them possess excellent heat conductive properties which can serve as a conductive layer to transmit heat through the polymer. It was found that using this kind of structure the recoverability approximated to 100%. In addition, the geometry position in the composites of both types of paper was optimized to acquire the most efficient heat transfer rate from the paper to the SMP. After that, the structures of both CNF paper and bucky paper have been characterized by scanning electronic microscopy. Also, the electrical volume resistivity of the nanocomposite incorporated with different volume fractions of carbon nanofiber paper was measured by four-point probe method. The shape recovery process of the composites driven by resistive heating was recorded. The thermo-mechanical properties of the nanocomposites with respect to various volume fractions of carbon nanofiber paper were analyzed by dynamic mechanical analysis (DMA).

Mechanical and Shape Recovery Properties of Shape Memory Polymer Composite Embedded with Cup-Stacked Carbon Nanotubes

Viscoelastic Damping Performance And Rheological Behaviour Of Cup-Stacked Carbon Nanotube Modified Epdxy Nanocomposites With Re-Agglomeration Network

Damping Properties of Cups-Stacked Carbon Nanotubes (cscnts)/rtm6 Composites

Preparation and Damping Properties of Cups-Stacked Carbon Nanotubes(Cscnts)/Prime 20

Viscoelastic Damping Behaviour of Cup Stacked Carbon Nanotube Modified Epoxy Nanocomposites with Tailored Interfacial Condition and Re-Agglomeration

Poly(methyl Methacrylate)-Decorated Single Wall Carbon Nanotube/epoxy Nanocomposites with Re-Agglomeration Networks: Rheology and Viscoelastic Damping Performance

Shape memory polymer nanocomposites with carbon nanofiber paper

Development of Trans-1,4-Polyisoprene Shape-Memory Polymer Composites Reinforced with Carbon Nanotubes Modified by Polydopamine

Polystyrene based shape memory nanocomposites

Carbon Fiber Reinforced Shape Memory Epoxy Composites with Superior Mechanical Performances

Thermo-Mechanical Properties of Polystyrene-Based Shape Memory Nanocomposites

Mechanical and electrical properties of shape memory polymer matrix and carbon nanocomposite

Mechanical and Shape Recovery Characterization of MWCNTs/HNTs-Reinforced Thermal-Responsive Shape-Memory Polymer Nanocomposites

Shape Memory Polymer Carbon Nanocomposites; Based on Carbon Nanopaper

Electro-Responsive Polystyrene Shape Memory Polymer Nanocomposites

Unidirectional carbon fiber reinforced cyanate‐based shape polymer composite with variable stiffness

Harnessing nanostructures and fiber architecture: A synergistic leap in shape memory polymer composites

Electro-activate Styrene-Based Shape Memory Polymer Nanocomposite Filled with Multi-Walled Carbon Nanotubes

Wet-Spinning Carbon Nanotube/Shape Memory Polymer Composite Fibers with High Actuation Stress and Predesigned Shape Change

Electro-Induced Shape-Memory Polymer Nanocomposite Containing Conductive Particles and Short Fibers

Molecular dynamics simulations of thermodynamics and shape memory effect in CNT-epoxy nanocomposites