Abstract:Shape-memory polymers (SMP) composites have attracted significant attention from both industrial and academic researchers due to their useful and fascinating functionality. Generally, SMP can be actuated by heat, electricity, water and chemicals. A large amount of work has been done on the shape recovery of shape memory polymers blended with conductive filler triggered by electrical resistive heating. However, the conductive filler will dramatically undermine the shape memory behavior and there is no effective way to increase the conductivity without compromise on the shape memory behavior. In this work, carbon nanofiber (CNF) paper and bucky paper were introduced to actuate shape memory polymer, respectively. The shape recovery of polymer was carried out by electrical resistive heating generated by CNF paper and bucky paper which were attached to the surface of the SMP composites. Also, both of them possess excellent heat conductive properties which can serve as a conductive layer to transmit heat through the polymer. It was found that using this kind of structure the recoverability approximated to 100%. In addition, the geometry position in the composites of both types of paper was optimized to acquire the most efficient heat transfer rate from the paper to the SMP. After that, the structures of both CNF paper and bucky paper have been characterized by scanning electronic microscopy. Also, the electrical volume resistivity of the nanocomposite incorporated with different volume fractions of carbon nanofiber paper was measured by four-point probe method. The shape recovery process of the composites driven by resistive heating was recorded. The thermo-mechanical properties of the nanocomposites with respect to various volume fractions of carbon nanofiber paper were analyzed by dynamic mechanical analysis (DMA).

Electro-Responsive Polystyrene Shape Memory Polymer Nanocomposites

Mechanical and Shape Recovery Properties of Shape Memory Polymer Composite Embedded with Cup-Stacked Carbon Nanotubes

Thermo-Mechanical Properties of Polystyrene-Based Shape Memory Nanocomposites

Electro-Induced Shape-Memory Polymer Nanocomposite Containing Conductive Particles and Short Fibers

Polystyrene based shape memory nanocomposites

Remote Controlled Multishape Polymer Nanocomposites with Selective Radiofrequency Actuations

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Shape memory polymer nanocomposites with carbon nanofiber paper

Electroactivate Shape-Memory Polymer Filled With Nanocarbon Particles And Short Carbon Fibers

Shape Memory Polymer Carbon Nanocomposites; Based on Carbon Nanopaper

Synergistic Effect Of Carbon Nanofiber And Sub-Micro Filamentary Nickel Nanostrand On The Shape Memory Polymer Nanocomposite

Electroactive Shape-Memory Polymer Nanocomposites Incorporating Carbon Nanofiber Paper

Shape memory polymer nanocomposites based on carbon nanopaper

Mechanical and electrical properties of shape memory polymer matrix and carbon nanocomposite

Wet-Spinning Carbon Nanotube/Shape Memory Polymer Composite Fibers with High Actuation Stress and Predesigned Shape Change

Electro-activate Styrene-Based Shape Memory Polymer Nanocomposite Filled with Multi-Walled Carbon Nanotubes

Shape Memory Nanocomposite and Its Application

Core-Shell Nano-Latex Blending Method to Prepare Multi-Shape Memory Polymers

Development of Trans-1,4-Polyisoprene Shape-Memory Polymer Composites Reinforced with Carbon Nanotubes Modified by Polydopamine

Carbon Fiber Reinforced Shape Memory Epoxy Composites with Superior Mechanical Performances

Polystyrene/thermoplastic polyurethane interpenetrating network-based nanocomposite with high-speed, thermo-responsive shape memory behavior