Abstract:The rapid development of high-power integrated electronic devices for 5 G system has created an urgent requirement for thermally conductive and electrically insulating materials, which has attracted significant research interest, especially for the engineering materials with mechanical flexibility and anisotropic thermal conductivity. In this study, exfoliated hexagonal boron nitride nanosheets (BNNSs) were incorporated in thermoplastic polyurethane (TPU) with varying contents of 10, 20 and 30 wt% through the solution-melt compounding. Then samples for testing were fabricated from the composites by 3D printing, and their thermal conductivity and tensile properties were evaluated to explore the structure-activity relationship. Results showed that the effects of melt squeezing and shear flow occurred during in 3D printing process were dominant in enabling the orientation of BNNSs within the TPU matrix, which was found to be more dependent on the ratio ( h / d n ) of layer thickness h to nozzle diameter d n and less dependent on the printing speed v . Such in-plane orientation of BNNSs combined with the rastering structure of the deposited strands in the warps and wefts and the low density of inner voids were helpful to improve the mechanical and thermal conductive performance of printed BNNS/TPU composites, demonstrating a much better retention of tensile strength and greatly increased thermal conductivity than those of molded samples via hot compression. In addition, the performance of printed composites was also beneficial from the size effect of BNNSs, which could not be achieved without nano exfoliation. As a result, the tensile strength and elongation at failure of the BNNS/TPU composites with 30 wt% loading were 106.2% and 116% higher than those of printed BN/TPU composites, respectively. In addition, anisotropic thermal conductivity of printed BNNS/TPU in the printing direction and thickness direction increases from 1.51 to 1.80 Wm -1 K -1 and from 1.26 to 1.30 Wm -1 K -1 , representing increases of 19.21% and 3.17%, respectively.

Manufacturing of Bio-Based TPU/CNT Composites Using Solvent-Free In-Situ Polymerization for 3D Printing Filament Applications

Manufacturing of Conductive Filaments for 3D/4D Printing through In Situ Polymerization of Biobased Thermoplastic Polyurethane/Multiwall Carbon Nanotube Composites

Development of a TPU/CNT/Cu Composite Conductive Filament with a High CNT Concentration

High content filling, toughness, and conductive performance of thermoplastic polyurethane/carbon nanotubes composites prepared by constructing the compact interface

Effect of Carbon Nanotube on Thermal, Tribological and Mechanical Properties of 3D Printing Polyphenylene Sulfide

MWCNTs-GNPs Reinforced TPU Composites with Thermal and Electrical Conductivity: Low-Temperature Controlled DIW Forming

Improvement of thermomechanical and dielectric properties of thermoplastic polyurethane using bismuth sodium titanate/carbon nanotube hybrid fillers

3D Printing Boron Nitride Nanosheets Filled Thermoplastic Polyurethane Composites with Enhanced Mechanical and Thermal Conductive Properties

High erosion resistance thermoplastic polyurethanes composites fabricated via intercalation reinforced interfacial interaction

3D Printed Thermoelectric Polyurethane/Multiwalled Carbon Nanotube Nanocomposites: A Novel Approach towards the Fabrication of Flexible and Stretchable Organic Thermoelectrics

A Solvent System Involved Fabricating Electrospun Polyurethane Nanofibers for Biomedical Applications

Improvement of the electromechanical properties of thermoplastic polyurethane composite by ionic liquid modified multiwall carbon nanotubes

Multi-dimensional fillers synergistically enhanced thermal conductivity of TPU composites in selective laser sintering technology

Fabrication and Characterization of Electrically Conductive 3D Printable TPU/MWCNT Filaments for Strain Sensing in Large Deformation Conditions

Properties of thermoplastic polyurethane synthesized from bio‐based diisocyanate for FDM 3D printing

Comprehensive characterization of 3D-printed TPU/carbon black composites: Morphological, thermal, and mechanical properties

Multi-Walled Carbon Nanotube-Enhanced Polyurethane Composite Materials and the Application in High-Performance 3D Printed Flexible Strain Sensors

Constructing interconnected network of MWCNT and BNNS in electrospun TPU films: Achieving excellent thermal conduction yet electrical insulation properties

Microwave Radiation Assisted Construction of Fused Deposition Modeling 3D Printing Flexible Sensors

Tunable Conductive Composite for Printed Sensors and Embedded Circuits

Constructing Heterostructured MWCNT-BN Hybrid Fillers in Electrospun TPU Films to Achieve Superior Thermal Conductivity and Electrical Insulation Properties