High content filling, toughness, and conductive performance of thermoplastic polyurethane/carbon nanotubes composites prepared by constructing the compact interface
Renhao Li,Liangjun Xia,Pei Lyu,Jiajing Zhang,Yun Wang,Bo Deng,Chunhua Zhang,Xin Liu,Weilin Xu
DOI: https://doi.org/10.1016/j.coco.2021.100948
IF: 8
2021-12-01
Composites Communications
Abstract:Conductive polymer composites have drawn significant attentions. However, the low interface between nanomaterials and polymer matrix may result in the failure of function during the applications. Herein, we report a simple, effective, and scalable strategy for the fabrication of thermoplastic polyurethane (TPU)/carbon nanotube (CNT) composites with high content filling, good interfaces, and high toughness. The distribution of CNT in the TPU matrix was well regulated using a binary-solvent assisted non-solvent induced phase separation method to solve the interface problem. The results showed that the hydrogen-bonding was beneficial to the construction of a good interface, and the thermal stabilities of the polyurethane/carbon nanotubes composite films (PCCFs) were significantly improved. Most importantly, the as-prepared PCCF with 25% CNT exhibited a tensile stress of 20.3 ± 1.7 MPa, a strain of 1084.7 ± 206.9%, and toughness of 171.9 ± 39.8 MJ m−3, respectively, mainly ascribed to a microcrack, a CNT bridge, CNT orientation, and pulled-out CNT. The flexible films also showed good conductivity under strain of 0–200%. These findings suggested that the technique described herein is broadly applicable in the design and fabrication of a new kind of conductive and tough composites.
materials science, composites