Abstract:The rapid development of high-power integrated electronic devices for 5 G system has created an urgent requirement for thermally conductive and electrically insulating materials, which has attracted significant research interest, especially for the engineering materials with mechanical flexibility and anisotropic thermal conductivity. In this study, exfoliated hexagonal boron nitride nanosheets (BNNSs) were incorporated in thermoplastic polyurethane (TPU) with varying contents of 10, 20 and 30 wt% through the solution-melt compounding. Then samples for testing were fabricated from the composites by 3D printing, and their thermal conductivity and tensile properties were evaluated to explore the structure-activity relationship. Results showed that the effects of melt squeezing and shear flow occurred during in 3D printing process were dominant in enabling the orientation of BNNSs within the TPU matrix, which was found to be more dependent on the ratio ( h / d n ) of layer thickness h to nozzle diameter d n and less dependent on the printing speed v . Such in-plane orientation of BNNSs combined with the rastering structure of the deposited strands in the warps and wefts and the low density of inner voids were helpful to improve the mechanical and thermal conductive performance of printed BNNS/TPU composites, demonstrating a much better retention of tensile strength and greatly increased thermal conductivity than those of molded samples via hot compression. In addition, the performance of printed composites was also beneficial from the size effect of BNNSs, which could not be achieved without nano exfoliation. As a result, the tensile strength and elongation at failure of the BNNS/TPU composites with 30 wt% loading were 106.2% and 116% higher than those of printed BN/TPU composites, respectively. In addition, anisotropic thermal conductivity of printed BNNS/TPU in the printing direction and thickness direction increases from 1.51 to 1.80 Wm -1 K -1 and from 1.26 to 1.30 Wm -1 K -1 , representing increases of 19.21% and 3.17%, respectively.

Constructing interconnected network of MWCNT and BNNS in electrospun TPU films: Achieving excellent thermal conduction yet electrical insulation properties

Constructing Heterostructured MWCNT-BN Hybrid Fillers in Electrospun TPU Films to Achieve Superior Thermal Conductivity and Electrical Insulation Properties

Mille-Feuille Inspired Thermally Conductive Polymer Nanocomposites with Overlapping BN Nanosheets for Thermal Management Applications.

MWCNTs-GNPs Reinforced TPU Composites with Thermal and Electrical Conductivity: Low-Temperature Controlled DIW Forming

Hot-pressing Induced Alignment of Boron Nitride in Polyurethane for Composite Films with Thermal Conductivity over 50 Wm−1 K−1

Engineering of Interfacial Interactions Among BN And CNT Hybrid Towards Higher Heat Conduction Within TPU Composites

Bridging boron nitride nanosheets with oriented carbon nanotubes by electrospinning for the fabrication of thermal conductivity enhanced flexible nanocomposites

Flexible silane‐functionalized boron nitride filled polymer composite with high thermal conductivity and electrical insulation

High thermal conductive polyurethane composite films with a three-dimensional boron nitride network in-situ constructed by multi-folding and multi-laminating

Dielectric thermally conductive boron nitride/silica@MWCNTs/polyvinylidene fluoride composites via a combined electrospinning and hot press method

Constructing Highly Thermally Conductive Polystyrene-Based Composites by Introducing Multi-Walled Carbon Nanotubes into Melamine Foam-Supported Boron Nitride Network

Enhanced Thermal Conductivity of Polyurethane Composites Via Engineering Small/large Sizes Interconnected Boron Nitride Nanosheets

3D Printing Boron Nitride Nanosheets Filled Thermoplastic Polyurethane Composites with Enhanced Mechanical and Thermal Conductive Properties

Constructing interconnected asymmetric conductive network in TPU fibrous Film: Achieving low-reflection electromagnetic interference shielding and surperior thermal conductivity

Flexible, High Thermal Conductivity, and EMI Shielding Performance Thermoplastic Polyurethane Composites Through Reinforced-Orientation Carbon Fiber

Polyarylene Ether Nitrile/boron Nitride Nanosheets Thermally Conductive Films Through Heterogeneous Multilayer Electrostatic Spinning

Water‐based Polyurethane Heating Film with Double‐Layer Conductive Network for a Rapid Electrothermal Response

Flexible, Quickly Responsive, and Highly Efficient Carbon Nanotube/Thermoplastic Polyurethane Composite Yarn for Multifunctional Wearable Devices

A New Route to Fabricate Flexible, Breathable Composites with Advanced Thermal Management Capability for Wearable Electronics

Carbon Nanotube-Polyurethane Composite Sheets for Flexible Thermoelectric Materials

High content filling, toughness, and conductive performance of thermoplastic polyurethane/carbon nanotubes composites prepared by constructing the compact interface