Abstract:A series of gelatinized starch–clay nanocomposites which exhibit intercalated and exfoliated structures have been developed. Various nanoclay dispersions were prepared (either by standard mixing or through the use of ultrasonics) prior to their combination with a high amylose content starch using high-speed mixing and extrusion technology. Intercalated and exfoliated type structures were observed in the sheet extruded nanocomposites using X-ray diffraction and transmission electron microscopy (TEM). Due to the hydrophilic nature of the gelatinized starch nanocomposite a novel preparatory technique was developed to produce nano scale sections for TEM. A range of plasticiser levels were used in conjunction with different unmodified nanoclays (sodium montmorillonite (Na-MMT) and fluorohectorite (Na-FHT)) having different cationic exchange capacities. It was shown that an optimum level of both plasticiser and nanoclay existed to produce a gelatinized starch film with the highest levels of exfoliation, resulting in superior properties. The use of ultrasonics was only advantageous in terms of clay dispersions at medium clay concentrations in the Na-MMT nanocomposites and higher clay concentrations in the Na-FHT, most probably due to the difference in cationic exchange capacity; however when the level of clay, water and starch was optimised an exfoliated structure was produced via standard mixing which exhibited comparable improvements in mechanical properties to ultrasonically treated samples.

Preparation and Characterization of Nylon6/cu2+-Exchanged and Fe3+-exchanged Montmorillonite Nanocomposite

Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

Preparation and Characterization of Nylon 66/montmorillonite Nanocomposites with Co-Treated Montmorillonites

Preparation and Characterization of Epoxy/Montmorillonite Nanocomposites

Direct Melt Extrusion Processing of Nylon 6/Clay Nanocomposites Based on Pristine Montmorillonite

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Synthesis, structure and mechanical properties of nylon6/montmorillonite nanocomposites

Preparation and Properties of Nylon‐1010/montmorillonite Nanocomposites by Melt Intercalation

Flammability and phase-transition studies of nylon 6/montmorillonite nanocomposites

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Nylon 10 10–montmorillonite Nanocomposite Made by Intercalating Polymerization

Preparation and Characterization of Nickel(ii)-Diethylenetriamine Complex in the Interlayer of Montmorillonite

Preparation and thermal stability of polypropylene/montmorillonite nanocomposites

Preparation and Characterization of Melt-Extruded Thermoplastic Starch/clay Nanocomposites

Synthesis and Characterization of Polyurethane/Montmorillonite Nanocomposites by in Situ Polymerization

Synthesis and characterization of polycarbonate/ABS/montmorillonite nanocomposites

Development of polypropylene/montmorillonite nanocomposites prepared by intercalation

Structures, thermal stability, and crystalline properties of polyamide6/organic-modified Fe-montmorillonite composite nanofibers by electrospinning