Abstract:The La-Co-O ( perovskite-type oxide), being selected as catalyst support for its high ability in activation Of 02, was prepared by sol-gel method using citric acid. A series of Mo/La-Co-O catalyst samples with different Mo-loading were prepared by wetness impregnation method. The catalytic performance of the catalyst samples in selective oxidation of CH4 to CH3OH was tested. The reaction resulted in products CH3OH, CO and CO2 over these catalyst samples. With the increase of Mo-loading, CH4 conversion gradually increased and CH3OH selectivity gave maximum value on 7% Mo/La-Co-O catalyst. The CH3OH selectivity of ca 60% and its yield of ca 6.7% were achieved under the conditions of n (CH4) : n (O-2): n (N-2) = 10 : 1 : 1, SV = 14.4 L/(g(.)h), p = 4.2 MPa and theta = 420 degreesC. And the CH3OH selectivity and yield continuously increased with the increase of reaction temperature on 7 % Mo/La-Co-O catalyst. The properties of the catalyst, such as structure, reducibility, oxidation state of surface ions, surface composition etc, were characterized by using BET, XRD, LRS, H-2-TPR and XPS techniques. The catalyst is mainly composed of LaCoO3 and Co3O4. The molybdena is amorphous and is well dispersed when it is loaded on La-Co-O. On the other hand, there exists interaction between the loaded Mo and the support La-Co-O, and thus modifies the properties of the catalyst. With the increase of Mo-loading, the reducibility of the catalyst is improved, and the O-/O2- ratio on the catalyst surface decreases. The reducibility and the O-/O2- ratio can determine the catalytic performance of Mo/La-Co-O catalyst in the selective oxidation of CH4 to CH3OH. The proper reducibility and proper O-/O2- ratio of the catalyst can enhance the selectivity and yield of CH3OH.

Catalytic conversion of methane to methanol over lanthanum-cobalt-oxide supported molybdenum based catalysts

Studies on selective oxidation of methane to methanol over Mo/La-Co-O catalyst

Methanol from oxidation of methane over MoOx/La-Co-oxide catalysts

Comparative studies on direct conversion of methane to methanol/formaldehyde over La–Co–O and ZrO 2 supported molybdenum oxide catalysts

Selective Oxidation Of Methane To Methanol Using Molecular Oxygen On Moox/(Lacoo3+Co3o4) Catalysts

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

Study on Methane Conversion over WOx/Co-Fe-Mo-O Catalysts

Selective Oxidation Of Methane To Methanol Over Wo3/Co-Fe-Mo-O Catalysts.

A highly efficient Li-Cu/MoO x catalyst constructed by a precursor dispersion and alkali metal promotion stepwise regulation strategy for CO 2 hydrogenation to methanol reaction

Performance and reaction mechanism of Mg-doped and Li-doped La 2 O 3 catalysts in oxidative coupling of methane: DFT and experiment study

Characterization and Catalytic Performance of Zr-Mo-Oxide Catalysts for Selective Oxidation of Methane to Formaldehyde

Single-step methane to methanol over lanthanum cerium oxide: The crucial role of surface reactive oxygen and carbonate species

Oxidative Coupling of Methane over Alkali Metal Oxide Promoted La2O3/BaCO3 Catalysts

Effects of partial substitution of Cu by Mn and Co in LaCu0.5Ni0.5O3 catalyst synthesized by mechanochemical method in the total oxidation of methane

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

Selective Oxidation of Methane to Methanol over Ceria‐Zirconia Supported Mono and Bimetallic Transition Metal Oxide Catalysts

Pseudo core-shell LaCoO3@MgO perovskite oxides for high performance methane catalytic oxidation

Catalytic combustion of methane over various perovskite-type oxides

Dendritic Mesoporous Silica Nanoparticle-Supported Molybdena Catalysts for Propane Selective Oxidation: Catalytic Performance versus Molybdena Molecular Structure

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Investigation of LaMnO3 Catalyst Loaded on HZSM‐5 Zeolite for CO Catalytic Oxidation