Abstract:The La-Co-O ( perovskite-type oxide), being selected as catalyst support for its high ability in activation Of 02, was prepared by sol-gel method using citric acid. A series of Mo/La-Co-O catalyst samples with different Mo-loading were prepared by wetness impregnation method. The catalytic performance of the catalyst samples in selective oxidation of CH4 to CH3OH was tested. The reaction resulted in products CH3OH, CO and CO2 over these catalyst samples. With the increase of Mo-loading, CH4 conversion gradually increased and CH3OH selectivity gave maximum value on 7% Mo/La-Co-O catalyst. The CH3OH selectivity of ca 60% and its yield of ca 6.7% were achieved under the conditions of n (CH4) : n (O-2): n (N-2) = 10 : 1 : 1, SV = 14.4 L/(g(.)h), p = 4.2 MPa and theta = 420 degreesC. And the CH3OH selectivity and yield continuously increased with the increase of reaction temperature on 7 % Mo/La-Co-O catalyst. The properties of the catalyst, such as structure, reducibility, oxidation state of surface ions, surface composition etc, were characterized by using BET, XRD, LRS, H-2-TPR and XPS techniques. The catalyst is mainly composed of LaCoO3 and Co3O4. The molybdena is amorphous and is well dispersed when it is loaded on La-Co-O. On the other hand, there exists interaction between the loaded Mo and the support La-Co-O, and thus modifies the properties of the catalyst. With the increase of Mo-loading, the reducibility of the catalyst is improved, and the O-/O2- ratio on the catalyst surface decreases. The reducibility and the O-/O2- ratio can determine the catalytic performance of Mo/La-Co-O catalyst in the selective oxidation of CH4 to CH3OH. The proper reducibility and proper O-/O2- ratio of the catalyst can enhance the selectivity and yield of CH3OH.

Performance and reaction mechanism of Mg-doped and Li-doped La 2 O 3 catalysts in oxidative coupling of methane: DFT and experiment study

Distribution and Role of Li in Li-doped MgO Catalysts for Oxidative Coupling of Methane

Single-Site Catalysis of Li-MgO Catalysts for Oxidative Coupling of Methane Reaction

Effects of Mg, Ca, Sr, and Ba Dopants on the Performance of La2O3 Catalysts for the Oxidative Coupling of Methane

Active oxygen center in oxidative coupling of methane on La2O3 catalyst

Pseudo core-shell LaCoO3@MgO perovskite oxides for high performance methane catalytic oxidation

Oxidative Coupling of Methane over Alkali Metal Oxide Promoted La2O3/BaCO3 Catalysts

Catalytic performance of La–Ce–O mixed oxide for combustion of methane

Fast Optimization of Limgmnox/La2o3 Catalysts for the Oxidative Coupling of Methane

Mechanistic insights into the oxidative coupling of methane over Li/MgO catalyst: An experimental and microkinetic modeling study

Studies on selective oxidation of methane to methanol over Mo/La-Co-O catalyst

Metal Ions (Li, Mg, Zn, Ce) Doped into La2O3 Nanorod for Boosting Catalytic Oxidative Coupling of Methane

Elucidating the action mechanism of different kinds of oxygen species on methane dissociation to generate methyl radical on lanthanum oxide catalyst

Catalytic conversion of methane to methanol over lanthanum-cobalt-oxide supported molybdenum based catalysts

Cerium oxide catalysts for oxidative coupling of methane reaction: Effect of lithium, samarium and lanthanum dopants

Synthesis and characterization of the flower-like La Ce1−O1.5+ catalyst for low-temperature oxidative coupling of methane

Li-Zno/La2o3 Catalyst for the Oxidation Coupling of Methane at Low Temperature

Lattice oxygen behaviors of Mn-based catalytic oxygen carriers and sustainable oxidative coupling of methane in chemical-looping scheme

How CO2 poisons La2O3 in an OCM catalytic reaction: A study by in situ XRD-MS and DFT

Effect of different oxygen species on the oxidative coupling of methane over TiO 2 catalysts

Enhanced C2+ Selectivity in Plasma-assisted Chemical Looping Oxidative Coupling of Methane using (Na, Li, and K) doped LaMnO3