Abstract:The stator winding insulation is one of the most important parts in large generators and electric motors. It is always subjected to the combined thermal, mechanical, electrical and environmental stresses during long-term operation. So the gradual deterioration of mechanical and electrical properties is inevitable. Continuous deterioration of electrical insulation will result in the decreasing of breakdown voltage and failure of generator or electric motor. It is very important for the safe operation of a large generator to inspect insulation condition and evaluate the remaining life of stator winding insulation. In order to assure the validity of evaluation, it is necessary to study the characteristic parameters that can indicate the condition of insulation deterioration. In this paper, a multi-stress aging system has been developed and the accelerated aging experiment based on the stator bars of 780 kW/6 kV electric motor has been conducted in the laboratory in order to simulate the practical aging of electric motor or generator in service. The developing laws of AC current parameters with aging time are analyzed. Moreover, the relations between the breakdown voltage and them are studied. During the process of multi-stress aging of epoxy/mica insulation, the AC current parameters, including the first and second AC current rapid voltage (U/sub pi1/, and U/sub pi2/), equivalent impedance and current increasing factor m/sub 2/, have apparent developing laws with aging of insulation. Moreover, the second AC current rapid increase voltage U/sub pi2/ shows close correlation with the residual breakdown. voltage, which can be used as a characteristic parameter to estimate the remaining life of epoxy/mica insulation. Therefore, the degradation of epoxy/mica insulation can be assessed efficiently by the AC testing method.

The application of statistical parameters of phase resolved PD distribution to aging extent assessment of large generator insulation

Aging Assessment of Large Generator Insulation Based on PD Measurements*

Study on the Development of PD Parameters During the Process of Multi-Stress Aging of Stator Winding

Study on the multi-stress aging of stator insulation based on fingerprint parameters

Ageing extent assessment of large generator insulation using advanced characterization techniques

Study on aging of stator bar insulation of generator based on moment characteristics of partial discharge

Diagnosis Of Stator Winding Insulation Of Large Generator Based On Partial Discharge Measurement

Aging diagnosis of large generator stator winding insulation based on ac dielectric characteristic parameters

ANALYSIS ON AGING CONDITION OF STATOR WINDING INSULATION OF GENERATOR BASED ON THE MOMENT CHARACTERISTICS OF PARTIAL DISCHARGE

Aging Diagnosis of Large Generator Stator Winding Insulation Based on Digital Discharge Detection

Assessment of stator winding insulation degradation in large generator by ultra-wideband PD detection

STUDY ON MULTI-STRESS AGING TEST SYSTEM FOR STATOR WINDING INSULATION OF LARGE GENERATOR

STUDY ON THE AGING CHARACTERISTICS OF STATOR WINDING INSULATION IN LARGE GENERATOR BASED ON OPERATING HISTORY

Study on aging diagnostics of large motor winding insulation based on digital partial discharge detection

Using AC Current Parameters to Evaluate Aging Condition of Stator Insulation

New Estimating Techniques for Multi-Stress Aging Test of Large Generator Stator Winding Insulation

Research on characteristic parameters for multi-factor aging of stator bar insulation of pumped storage generator

Analysis of Aging Properties for Insulation Based on Statistical Parameters of Partial Discharge Under Pulse Voltage

Study on aging extent of stator insulation in a large turbogenerator

Digital Measurement of Partial Discharges in Generator Stator Bar Insulation During Aging Test

Study on UWB Frequency Characteristics of Partial Discharge As a Criterion of Aging Degree of Stator Winding Insulation