Abstract:Partial discharges (PD) measurements provide valuable information for the condition assessment of the high voltage insulation systems. PD tests have become a fundamental tool to determine the status of high voltage elements, contributing to the quality assurance in high voltage equipment. Some reasons for the increasing usage of DP tests are based in the effectiveness of the new developments presented to achieve more reliable diagnosis. During the last five decades different approaches have been developed and applied to PD measurement and processing techniques. Significant efforts have been made to deal with the most common problems arising in on-site and on-line measurements: high levels of noise and interferences, the emergence of different PD sources simultaneously and the difficulty of locating the site of the defects and to identify the type of defects. In order to overcome all these drawbacks, this paper proposes an efficient method based in advanced measuring and diagnosis techniques, with the aim to achieve a proper sensitivity in PD measurements and an accurate assessment of the elements insulation condition. In PD measurements the main factors that condition the signal acquisition, the subsequent processing and the capability to obtain an accurate diagnosis are: selection of a suitable detection technique together with the type of sensors and their bandwidth, implementation of an effective noise filtering tool, development of a defect localization method and implementation of PD classification techniques for pattern recognition and defect identification. All these factors have been considered in this study and a complete measuring method together with powerful diagnostic tools are presented. Measurements in a test object consisting in a one-phase cable system were accomplished with real insulation defects, with the aim to show the effectiveness of the proposed method and the optimized analysis techniques.

Digital Measurement of Partial Discharges in Generator Stator Bar Insulation During Aging Test

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

Assessment of stator winding insulation degradation in large generator by ultra-wideband PD detection

Degradation Diagnosis of Large Stator Winding Insulation Based on Ultra-Wide Band Partial Discharge Detecting Technique

Evaluation of the Degradation of Generator Stator Ground Wall Insulation under Multistresses Aging

Partial discharge detection on power equipment using a magneto-resistive sensor

PD Electromagnetic Emission of Turn-to-turn Insulation in Inverter-fed Motor

Inverter-Embedded Partial Discharge Testing for Reliability Enhancement of Stator Winding Insulation in Low Voltage Machines

Partial discharge theory and technologies related to medium-voltage electrical equipment

An Experimental Study on the Partial Discharge Model in Stator Windings Insulation of Generators

Development and Application of DC Partial Discharge Test System

Experimental Study of Partial Discharge Pulses Propagation in Stator Winding of Hydro Generator

Aging Extent Assessment of Insulation Based on Velocity Measurement of Ultrasonic Longitudinal Wave Propagated in Stator Insulation

Advanced techniques for on-line PD measurements in high voltage systems

Partial Discharge Detection and Sensitivity Improvement for Bushing Based on Optical Interference Technique

Research on characteristic parameters for multi-factor aging of stator bar insulation of pumped storage generator

An Advanced Method for Detection of Partial Discharge in Oil-Paper Insulated Transformer Bushings and Current Transformers

Inference of PD in electrical insulation by charge-height probability distribution. Diagnosis of insulation system degradation

An Online Groundwall and Phase-to-Phase Stator Insulation Monitoring Method for Inverter-Fed Machine.

Partial Discharge Detection of Insultors in GIS: Effectiveness and Limitation

Partial Discharge Diagnosis for Transformer - One Step Toward Strong Smart Grid in China