Abstract:Internal insulation defects of oil-immersed transformers are common because of flaws in both manufacturing and transportation process. Partial discharge (PD) activity caused by insulation defects may occur at rated voltage condition, leading to deterioration of material, which results in breakdown of insulation. Feature parameters of PD are closely related to the performance of insulation materials. Therefore, the parameter changes under long-term AC voltage due to the decrease in electrical properties of material. It is effective to acquire insulation condition of materials by analyzing changes in the parameters of PD. The present thesis studied partial discharge in insulation defect of oil-paper insulation under long-term AC voltage. The PD tests were performed on specimens of 1 mm thickness which was placed between the needle-to-plane electrodes in an oil cup. The specimen was impregnated with oil in vacuum with treatment of hot air drying in order to remove moisture. Feature parameters of PD, such as phase-resolved partial discharge analysis and equivalent time-frequency, were recorded during the test process. When the feature parameters of PD are significantly changed, some specimens were removed. The surface appearance of these specimens was studied by scanning electron microscope. The measurement provides a theoretical basis for the analysis of the changes in the feature parameters of PD, which is helpful for the estimation of remaining life of insulation material. Test results indicate that as the AC voltage applied, cellulose depolymerisation continuously happened at the surface of paper. Cellulose in some area is carbonized by PD, and particulates are created. As the PD developed, the discharge magnitude is increased at the beginning while decreased rapidly just before breakdown of the paper, and the distribution phase of discharges is almost unchanged.

Inference of PD in electrical insulation by charge-height probability distribution. Diagnosis of insulation system degradation

Partial Discharge Characteristics in the Course of Aging Within XLPE Insulation

Measurement for Partial Discharge and Analysis on Insulation Aging under Continuous Square Pulse Voltage

Partial Discharge Aging of Epoxy Insulation at Different High-Frequency Pulse Parameters and Environmental Stresses

Variation of Surface Charge Distribution in the Process of PD Degradation

Partial discharge features and parameters characterization under typical defect geometries in oil-paper insulation: Considering the aging states

Analysis of Aging Properties for Insulation Based on Statistical Parameters of Partial Discharge Under Pulse Voltage

Investigation of partial discharge characteristics in XLPE cable insulation under increasing electrical stress

Investigation on Humidity Effect on Partial Discharge Considering Thermal Aging

Characteristics of ultra-wideband partial discharge of insulation in aging process

Investigation on Combined Effect of Humidity–temperature on Partial Discharge Through Dielectric Performance Evaluation

Degradation Diagnosis of Large Stator Winding Insulation Based on Ultra-Wide Band Partial Discharge Detecting Technique

Study on the Development of PD Parameters During the Process of Multi-Stress Aging of Stator Winding

Partial Discharge Characteristic Study of Gap Defect in Oil-paper Insulation under Different Aging Degree

Evolution of Partial Discharge of Oil-Paper Insulation under Long-Term AC Voltage

Study on the multi-stress aging of stator insulation based on fingerprint parameters

Partial Discharge Behaviors Excited by High-Frequency Square Pulse Voltage in Cast Resin Insulation with Thermal-Induced Defect

Experimental Study on Partial Discharge in XLPE Insulation During Electrical Aging

Partial Discharge Behavior of Epoxy/paper Insulated Tubular Busbars with Artificial Defects

Partial Discharge Development in Needle-Plane Configuration of Oil-Paper Insulation under AC Voltage

Partial Discharge Detection of Insultors in GIS: Effectiveness and Limitation