Abstract:Two groups of fresh full size stator bars of an 18 kV/180 MW generator were subjected to accelerated thermomechanical and electrical-thermal combined stress aging respectively to investigate the deterioration of groundwall insulation. The dissipation factor measurement was performed during the thermomechanical stress aging together with tap testing and dimension measurement. In addition, the dissipation parameters were also measured during the electrical-thermal combination aging. The correlation analysis between the dissipation parameters and the dimension of coil straight section, the insulation delamination were made respectively. It was found that the high voltage dissipation factor measured at room temperature, the dissipation factor tip-up and the capacitance tip-up are strongly correlated with the degree of insulation delamination, which indicates that the three parameters are sensitive indicators of the aging condition of stator bar insulation. It was also found that among all of the dissipation parameters, the high voltage dissipation factor measured at high temperature has the strongest correlation relationship with the change in the dimension of coil straight section. It is inferred that the parameter can reflect more chemical and structural changes within the insulation in addition to insulation delamination. The comparative analysis on the voltage dependency of dissipation factor implies that the characteristic crest on the dissipation factor curve could be taken as a fingerprint parameter to distinguish the insulation delamination type.

ANALYSIS ON AGING CONDITION OF STATOR WINDING INSULATION OF GENERATOR BASED ON THE MOMENT CHARACTERISTICS OF PARTIAL DISCHARGE

Study on aging of stator bar insulation of generator based on moment characteristics of partial discharge

STUDY ON THE AGING CHARACTERISTICS OF STATOR WINDING INSULATION IN LARGE GENERATOR BASED ON OPERATING HISTORY

Diagnosis Of Stator Winding Insulation Of Large Generator Based On Partial Discharge Measurement

Aging Assessment of Large Generator Insulation Based on PD Measurements*

The application of statistical parameters of phase resolved PD distribution to aging extent assessment of large generator insulation

Study on aging diagnostics of large motor winding insulation based on digital partial discharge detection

Study on the Development of PD Parameters During the Process of Multi-Stress Aging of Stator Winding

Study on the multi-stress aging of stator insulation based on fingerprint parameters

Analysis of Aging Properties for Insulation Based on Statistical Parameters of Partial Discharge Under Pulse Voltage

Aging diagnosis of large generator stator winding insulation based on ac dielectric characteristic parameters

Aging Diagnosis of Large Generator Stator Winding Insulation Based on Digital Discharge Detection

AGING DIAGNOSIS OF LARGE GENERATOR WINDING INSULATION BASED ON DYNAMIC MECHANICAL ANALYSIS

Research on characteristic parameters for multi-factor aging of stator bar insulation of pumped storage generator

Study on aging extent of stator insulation in a large turbogenerator

Evaluation of the Degradation of Generator Stator Ground Wall Insulation under Multistresses Aging

STUDY ON MULTI-STRESS AGING TEST SYSTEM FOR STATOR WINDING INSULATION OF LARGE GENERATOR

Study on the Characteristic Parameters Used to Assess the Insulation Condition of Stator Winding

Diagnosis of Generator Stator Winding Insulation Based on Dissipation Factor Measurement

Study on Multi-Factor Aging Characteristics of Stator Insulation for Wind Turbine Generator

Study On Multi-Factor Aging Characteristics Of Generator Stator Bars