Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Solvothermal synthesis of titanium phosphides via sodium co-reduction of PCl 3 and TiCl 4

The Thermal Analysis, Crystal Growth And Structure Transformation Of Nano-Scale Tio2 Prepared By Ticl4 Hydrolysis

Solvothermal preparation of tin phosphide nanorods

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Solvent-controlled Synthesis of Three-Dimensional TiO2 Nanostructures Via a One-Step Solvothermal Route

Studies on the synthesis of titanium silicalite, TS-1

Synthesis of lithium conducting titanium phosphates by the sol-gel process

Hydrothermal synthesis of hierarchical titanium silicalite-1 using single template

Synthesis of Ti powders with different morphologies via controlling the valence state of the titanium ion in KCl-NaCl molten salt

Self-assembly and formation mechanism of single-crystal SrTiO3 nanosheets via solvothermal route with ethylene glycol as reaction medium

A Novel One-Step Solvothermal Route to Nanocrystalline Sn4p3

The co-reduction route to TiC nanocrystallites at low temperature

Fundamental study on synthesis and enrichment of titanium subchloride

PREPARATION OF ANATASE TiO2 SOL AND POWDER BY SOLVOTHERMAL SYNTHESIS

Solvothermal Synthesis of Tio2: Anatase Nanocrystals and Rutile Nanofibres from Ticl4 in Acetone

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Highly dispersed SrTiO₃ nanocubes from a rapid sol-precipitation method.

Synthesis of Titanium Silicalite-1 with Small Crystal Size by Using Mother Liquid of Titanium Silicalite-1 As Seed

Influence of solution concentration on the hydrothermal preparation of titania crystallites

Molten salt synthesis of titanium carbide using different carbon sources as templates

A single-source molten salt synthesis of uniform octahedral Na2Ti3O7 particels composed of nanorods